电子质量
電子質量
전자질량
ELECTRONICS QUALITY
2012年
6期
20-22
,共3页
电位器%钎料%熔化%失效
電位器%釬料%鎔化%失效
전위기%천료%용화%실효
potentiometer%soldering tin%fusion%failure
某产品在进行振动应力筛选时,出现了测角输出动故障。通过对故障及产品原理的分析,确认了产品失效的机理。并对具体故障器件线绕电位器进行了失效分析,找出了测角输出故障的主要原因,即该线绕电位器内部接线方式和锡铅焊料选择不当所致。通过改进线绕电位器引线接线方式以及改变电位器内部钎料,提高了线绕电位器的可靠性,有效控制类似故障的再次发生。
某產品在進行振動應力篩選時,齣現瞭測角輸齣動故障。通過對故障及產品原理的分析,確認瞭產品失效的機理。併對具體故障器件線繞電位器進行瞭失效分析,找齣瞭測角輸齣故障的主要原因,即該線繞電位器內部接線方式和錫鉛銲料選擇不噹所緻。通過改進線繞電位器引線接線方式以及改變電位器內部釬料,提高瞭線繞電位器的可靠性,有效控製類似故障的再次髮生。
모산품재진행진동응력사선시,출현료측각수출동고장。통과대고장급산품원리적분석,학인료산품실효적궤리。병대구체고장기건선요전위기진행료실효분석,조출료측각수출고장적주요원인,즉해선요전위기내부접선방식화석연한료선택불당소치。통과개진선요전위기인선접선방식이급개변전위기내부천료,제고료선요전위기적가고성,유효공제유사고장적재차발생。
There occurred maladjustment angle wobbling during vibration stess screening.Failure mech- anism is confirmed through the analysis of the component and theory,and the main reason is found out.It is the wrong way of the internal wiring and inappropriate selelction of soldering tin in the potentiometer.Se it improves the reliability and reduces the possibility of fault occurrence through changing the way of internal wiring and solder in the potentiometer.