中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2012年
12期
1492-1495
,共4页
郑丽娟%向龙%刘会莹%李辉%付宇明
鄭麗娟%嚮龍%劉會瑩%李輝%付宇明
정려연%향룡%류회형%리휘%부우명
焊接接头%埋藏裂纹%脉冲放电%裂纹止裂%力学性能
銲接接頭%埋藏裂紋%脈遲放電%裂紋止裂%力學性能
한접접두%매장렬문%맥충방전%렬문지렬%역학성능
welded joint%embedding crack%pulse current discharge%crack arrest%mechanical property
采用电磁热止裂强化方法对异种材料焊接接头进行强化研究,对含椭圆形埋藏裂纹缺陷的焊接接头进行了脉冲放电数值分析,得到放电瞬间的热应力场和冷却到常温时的残余应力场,结果表明,脉冲放电瞬间焊接接头中的裂纹尖端温升超过材料熔点,裂尖钝化并产生了有利的残余压应力;对Q235和1Cr18Ni9焊接接头进行了电磁热强化试验研究,结果表明,试件通过放电强化,焊接接头的力学性能得到改善,抗拉强度提高19.4%,冲击韧性提高12.07%。
採用電磁熱止裂彊化方法對異種材料銲接接頭進行彊化研究,對含橢圓形埋藏裂紋缺陷的銲接接頭進行瞭脈遲放電數值分析,得到放電瞬間的熱應力場和冷卻到常溫時的殘餘應力場,結果錶明,脈遲放電瞬間銲接接頭中的裂紋尖耑溫升超過材料鎔點,裂尖鈍化併產生瞭有利的殘餘壓應力;對Q235和1Cr18Ni9銲接接頭進行瞭電磁熱彊化試驗研究,結果錶明,試件通過放電彊化,銲接接頭的力學性能得到改善,抗拉彊度提高19.4%,遲擊韌性提高12.07%。
채용전자열지렬강화방법대이충재료한접접두진행강화연구,대함타원형매장렬문결함적한접접두진행료맥충방전수치분석,득도방전순간적열응력장화냉각도상온시적잔여응력장,결과표명,맥충방전순간한접접두중적렬문첨단온승초과재료용점,렬첨둔화병산생료유리적잔여압응력;대Q235화1Cr18Ni9한접접두진행료전자열강화시험연구,결과표명,시건통과방전강화,한접접두적역학성능득도개선,항랍강도제고19.4%,충격인성제고12.07%。
Strengthening welded joints of dissimilar materials was studied based on electromagnetic heating crack arrest. Through the numerical simulation method the welded joints with embedding el- liptical crack were discharged, the thermal stress field was obtained and the residual stress was also obtained via cooling to room temperature. The simulation results show that at the time of pulse current discharge in welded joints with crack the temperature at the place of crack tip is beyond its melt- ing point, meanwhile the crack tip blunts and generates compressive stress which is good for work- piece. Through studying the electromagnetic heating crack arrest experiments for welded joint of Q235 and 1Cr18Ni9,it proves that when specimen is discharged the mechanical property of welded joints will be better than before,the tensile strength is improved by 19.4% and the impact toughness is im- proved by 12.07%.