微电机
微電機
미전궤
MICROMOTORS SERVO TECHNIQUE
2012年
11期
67-74
,共8页
陈敏祥%阮国贤%关仁元%王宗培
陳敏祥%阮國賢%關仁元%王宗培
진민상%원국현%관인원%왕종배
步进电动机%混合式步进电动机%增强型混合式步进电动机%最大比转矩系数%开环%闭环
步進電動機%混閤式步進電動機%增彊型混閤式步進電動機%最大比轉矩繫數%開環%閉環
보진전동궤%혼합식보진전동궤%증강형혼합식보진전동궤%최대비전구계수%개배%폐배
步进电动机今后的发展方向是寻求一种快速性有较明显提高的主流系列产品,关键是要提高电动机的最大比转矩系数Cmt,同时要考虑技术经济指标和制造工艺适合量产等,分析了追求步进电动机性能提高过程中的成果,增强型结构的混合步进电动机很突出,应能成为主流步进电动机发展的趋势.增强型电动机样机的测试表明:最大比转矩系数明显提高,基本上能达到通用伺服电动机的水平;开环运行转速和输出功率明显提高;不饱和的转矩特性,改变了步进电动机因饱和特性而不是理想的适合闭环控制的电动机类型,增强型电动机采用闭环控制可以获得接近或类似通用交流伺服电动机系统的快速性和过载能力.
步進電動機今後的髮展方嚮是尋求一種快速性有較明顯提高的主流繫列產品,關鍵是要提高電動機的最大比轉矩繫數Cmt,同時要攷慮技術經濟指標和製造工藝適閤量產等,分析瞭追求步進電動機性能提高過程中的成果,增彊型結構的混閤步進電動機很突齣,應能成為主流步進電動機髮展的趨勢.增彊型電動機樣機的測試錶明:最大比轉矩繫數明顯提高,基本上能達到通用伺服電動機的水平;開環運行轉速和輸齣功率明顯提高;不飽和的轉矩特性,改變瞭步進電動機因飽和特性而不是理想的適閤閉環控製的電動機類型,增彊型電動機採用閉環控製可以穫得接近或類似通用交流伺服電動機繫統的快速性和過載能力.
보진전동궤금후적발전방향시심구일충쾌속성유교명현제고적주류계렬산품,관건시요제고전동궤적최대비전구계수Cmt,동시요고필기술경제지표화제조공예괄합양산등,분석료추구보진전동궤성능제고과정중적성과,증강형결구적혼합보진전동궤흔돌출,응능성위주류보진전동궤발전적추세.증강형전동궤양궤적측시표명:최대비전구계수명현제고,기본상능체도통용사복전동궤적수평;개배운행전속화수출공솔명현제고;불포화적전구특성,개변료보진전동궤인포화특성이불시이상적괄합폐배공제적전동궤류형,증강형전동궤채용폐배공제가이획득접근혹유사통용교류사복전동궤계통적쾌속성화과재능력.