合成纤维工业
閤成纖維工業
합성섬유공업
CHINA SYNTHETIC FIBER INDUSTRY
2013年
6期
27-30
,共4页
王华%郭继荣%韩笑%李崇俊
王華%郭繼榮%韓笑%李崇俊
왕화%곽계영%한소%리숭준
聚丙烯腈纤维%蒸汽%拉伸%毛丝%致密性%应力
聚丙烯腈纖維%蒸汽%拉伸%毛絲%緻密性%應力
취병희정섬유%증기%랍신%모사%치밀성%응력
polyacrylonitrile fiber%steam%drawing%fuzz%compactness%stress
采用自制的有效拉伸段为0.4m的蒸汽拉伸箱对聚丙烯腈(PAN)纤维进行拉伸,分析了蒸汽拉伸过程中毛丝产生的原因.结果表明:提高干燥后PAN纤维的温度和蒸汽温度有利于塑性拉伸,但是对于蒸汽拉伸过程中消除毛丝的贡献不大;纤维致密性差、纤维直径不均匀以及拉伸倍数分配不合理是PAN纤维蒸汽拉伸过程中产生毛丝的主要原因.
採用自製的有效拉伸段為0.4m的蒸汽拉伸箱對聚丙烯腈(PAN)纖維進行拉伸,分析瞭蒸汽拉伸過程中毛絲產生的原因.結果錶明:提高榦燥後PAN纖維的溫度和蒸汽溫度有利于塑性拉伸,但是對于蒸汽拉伸過程中消除毛絲的貢獻不大;纖維緻密性差、纖維直徑不均勻以及拉伸倍數分配不閤理是PAN纖維蒸汽拉伸過程中產生毛絲的主要原因.
채용자제적유효랍신단위0.4m적증기랍신상대취병희정(PAN)섬유진행랍신,분석료증기랍신과정중모사산생적원인.결과표명:제고간조후PAN섬유적온도화증기온도유리우소성랍신,단시대우증기랍신과정중소제모사적공헌불대;섬유치밀성차、섬유직경불균균이급랍신배수분배불합리시PAN섬유증기랍신과정중산생모사적주요원인.