粮食加工
糧食加工
양식가공
GRAIN PROCESSING
2012年
4期
64-65,78
,共3页
惯性往复振动机械%橡胶弹簧%刚度特性%有限元分析
慣性往複振動機械%橡膠彈簧%剛度特性%有限元分析
관성왕복진동궤계%상효탄황%강도특성%유한원분석
inertial reciprocating machines%rubber spring%stiffness character%finite element analysis
以邵尔A硬度70度的惯性往复振动机械橡胶支承弹簧为研究对象,采用2参数Mooney-Rivlin橡胶弹性理论模型,根据橡胶硬度与材料常数C1、C2的关系确定C1、C2之和,利用ANSYS软件的plane182平面单元建立橡胶弹簧的轴对称有限元模型,分别取C2/C1=0、0.02和0.2,对模型进行不同轴向静载荷的非线性有限元静力分析,得到弹簧轴向变形与载荷的非线性关系,通过与橡胶弹簧实验测试结果的对比,确定了C2/C1的合理取值,并验证了上述有限元分析方法的可行性和正确性。为复杂结构橡胶弹簧的设计、刚度特性分析提供了一种有效的方法。
以邵爾A硬度70度的慣性往複振動機械橡膠支承彈簧為研究對象,採用2參數Mooney-Rivlin橡膠彈性理論模型,根據橡膠硬度與材料常數C1、C2的關繫確定C1、C2之和,利用ANSYS軟件的plane182平麵單元建立橡膠彈簧的軸對稱有限元模型,分彆取C2/C1=0、0.02和0.2,對模型進行不同軸嚮靜載荷的非線性有限元靜力分析,得到彈簧軸嚮變形與載荷的非線性關繫,通過與橡膠彈簧實驗測試結果的對比,確定瞭C2/C1的閤理取值,併驗證瞭上述有限元分析方法的可行性和正確性。為複雜結構橡膠彈簧的設計、剛度特性分析提供瞭一種有效的方法。
이소이A경도70도적관성왕복진동궤계상효지승탄황위연구대상,채용2삼수Mooney-Rivlin상효탄성이론모형,근거상효경도여재료상수C1、C2적관계학정C1、C2지화,이용ANSYS연건적plane182평면단원건립상효탄황적축대칭유한원모형,분별취C2/C1=0、0.02화0.2,대모형진행불동축향정재하적비선성유한원정력분석,득도탄황축향변형여재하적비선성관계,통과여상효탄황실험측시결과적대비,학정료C2/C1적합리취치,병험증료상술유한원분석방법적가행성화정학성。위복잡결구상효탄황적설계、강도특성분석제공료일충유효적방법。
The rubber supporting spring with Shaore a hardness 70 for inertial reciprocating machines was in- vestigated. The sum of C1 and C2 in two parameters Mooney-Rivlin model was determined by the relationship be- tween rubber hardness and rubber material constants C1 and C2. The axisymmetric finite element model of rubber spring was built by 182 plane unit of ANSYS. The C~/CI=0,0.02 and 0.2 were chose respectively, the nonlinear relationship between spring axial deformation and load was obtained after nonlinear finite element static analysis of different axial static load to model. Compared it with the results of experiment, the reasonable value of C2/C~ was determined, and the correctness and feasibility of finite element analysis was verified.Thus an effective method is provided for design and stiffness character analysis of complex structure rubber spring.