现代显示
現代顯示
현대현시
ADVANCED DISPLAY
2012年
7期
18-21
,共4页
赵德友%刘亮%于翔%龚娟%杨国波
趙德友%劉亮%于翔%龔娟%楊國波
조덕우%류량%우상%공연%양국파
ODF%液晶量%边框胶穿刺%生产节拍
ODF%液晶量%邊框膠穿刺%生產節拍
ODF%액정량%변광효천자%생산절박
ODF%liquid crystal amount%sealant collapse%tact time
根据ODF(OneDropFilling)工艺的实际生产情况,探讨了液晶量、边框胶涂布效果、关键工艺生产节拍(TactTime)和外围边框胶(DummySeal)设计方式对边框胶穿刺情况的影响,发现ODF工艺中液晶与未固化的边框胶接触是发生边框胶穿刺的根本原因。液晶量越大边框胶穿刺情况越严重;边框胶涂布效果的直线性越好,其穿刺情况越轻微;液晶与未固化边框胶的接触时间越长,其穿刺情况越严重,甚至出现大量漏液晶;外围边框胶开口式设计有利于改善边框胶穿刺情况。
根據ODF(OneDropFilling)工藝的實際生產情況,探討瞭液晶量、邊框膠塗佈效果、關鍵工藝生產節拍(TactTime)和外圍邊框膠(DummySeal)設計方式對邊框膠穿刺情況的影響,髮現ODF工藝中液晶與未固化的邊框膠接觸是髮生邊框膠穿刺的根本原因。液晶量越大邊框膠穿刺情況越嚴重;邊框膠塗佈效果的直線性越好,其穿刺情況越輕微;液晶與未固化邊框膠的接觸時間越長,其穿刺情況越嚴重,甚至齣現大量漏液晶;外圍邊框膠開口式設計有利于改善邊框膠穿刺情況。
근거ODF(OneDropFilling)공예적실제생산정황,탐토료액정량、변광효도포효과、관건공예생산절박(TactTime)화외위변광효(DummySeal)설계방식대변광효천자정황적영향,발현ODF공예중액정여미고화적변광효접촉시발생변광효천자적근본원인。액정량월대변광효천자정황월엄중;변광효도포효과적직선성월호,기천자정황월경미;액정여미고화변광효적접촉시간월장,기천자정황월엄중,심지출현대량루액정;외위변광효개구식설계유리우개선변광효천자정황。
According to the actual production of One Drop Filling Process, liquid crystal amount, the coating effect of sealant, Tact Time of key process and the design mode of Dummy Seal have been discussed, which have influence on sealant collapse. The results show in ODF process the basic reason of sealant collapse is that LC contacts with uncured sealant. The larger liquid crystal amount, sealant collapse is more serious. The better linearity of the coating effect of sealant, sealant collapse is slighter, and the longer time LC contacting with uncured sealant, the more serious sealant collapse, even leading to a large number of LC leak. The open mode of Dummy Seal is beneficial to improve sealant collapse.