照明工程学报
照明工程學報
조명공정학보
CHINA ILLUMINATING ENGINEERING JOURNAL
2013年
6期
66-70,119
,共6页
多颗LED光源%抛物线型反射器%参数%照度分布
多顆LED光源%拋物線型反射器%參數%照度分佈
다과LED광원%포물선형반사기%삼수%조도분포
multi-LED light sources%parabolic reflector%parameters%illuminance distribution
在普通LED照明应用中,常采用多颗LED光源加装抛物线型反射器来满足照明要求。本文以9颗LED光源为例,探讨抛物线型反射器特征参数对被照面照度的影响。模拟结果表明:反射器长度不变,焦距越小,光能聚集效果越好;反射器口径不变,随着焦距的增大,被照面照度分布由光斑逐渐变为光环,中心照度逐渐降低;反射器焦距不变,随着口径的减小,被照面中心区域的照度几乎不变,但两侧的照度略有下降。在反射器口径面加装磨砂透光板后,被照面聚光区域的照度下降明显,但是被照面照度分布更加均匀;按环形排列方式增加LED光源的数目仅增大被照面的照度。
在普通LED照明應用中,常採用多顆LED光源加裝拋物線型反射器來滿足照明要求。本文以9顆LED光源為例,探討拋物線型反射器特徵參數對被照麵照度的影響。模擬結果錶明:反射器長度不變,焦距越小,光能聚集效果越好;反射器口徑不變,隨著焦距的增大,被照麵照度分佈由光斑逐漸變為光環,中心照度逐漸降低;反射器焦距不變,隨著口徑的減小,被照麵中心區域的照度幾乎不變,但兩側的照度略有下降。在反射器口徑麵加裝磨砂透光闆後,被照麵聚光區域的照度下降明顯,但是被照麵照度分佈更加均勻;按環形排列方式增加LED光源的數目僅增大被照麵的照度。
재보통LED조명응용중,상채용다과LED광원가장포물선형반사기래만족조명요구。본문이9과LED광원위례,탐토포물선형반사기특정삼수대피조면조도적영향。모의결과표명:반사기장도불변,초거월소,광능취집효과월호;반사기구경불변,수착초거적증대,피조면조도분포유광반축점변위광배,중심조도축점강저;반사기초거불변,수착구경적감소,피조면중심구역적조도궤호불변,단량측적조도략유하강。재반사기구경면가장마사투광판후,피조면취광구역적조도하강명현,단시피조면조도분포경가균균;안배형배렬방식증가LED광원적수목부증대피조면적조도。
In order to meet the lighting needs , the multi-LED light sources and the parabolic reflector are usually applied in the ordinary LED lighting .Taking 9-LED light source as an example , the influences of the parabolic reflector characteristic parameters on the illuminance of the illuminated target plane are discussed .The results show that , for the fixed reflector length , the smaller focal length , the better is the effect of light gathering .For the fixed reflector aperture , the illuminance shape gradually changes from speckle to halo and the illuminance at the central region gradually decreases with the increase of the focal length.When the reflector focal length is fixed , the illuminance at edge region slightly decreases and the illuminance at central region position is almost constant with the decrease of the diameter .With the frosted glass installed at the aperture plane , the illuminance of the whole target plane significantly decreases and the illuminance distribution is more uniform .However, the increase in number of LED light source only increases the illuminance .