CAJ | 학술논문

用连续铸轧法制备了3003Al、1050Al合金箔,研究了合金元素含量及冷变形总加工率对太阳集能少反射铝箔的力学性能及比电容的影响.研究结果表明：增加合金元素含量造成变形抗力提高、抗弯次数降低,给冷轧及腐蚀带来不利影响,保持冷变形程度大于97%可有效增加腐蚀后铝箔的比表面积,提高铝箔质量.
용련속주알법제비료3003Al、1050Al합금박,연구료합금원소함량급랭변형총가공솔대태양집능소반사려박적역학성능급비전용적영향.연구결과표명：증가합금원소함량조성변형항력제고、항만차수강저,급랭알급부식대래불리영향,보지랭변형정도대우97%가유효증가부식후려박적비표면적,제고려박질량.
3003Al and 1050Al foil were prepared by twin-roll casting process, the effects on mechanical properties and specific capacitance of the alloying elements and the total processing rate of cold-word have been studied. The results show that increasing the alloying element was harmful to cold rolling and corrosion due to the raising of the strength and the falling of the bending resistance, and the specific surface area of 1050Al foil increased remarkably while this foil was prepared under a cold deformation rate about 97%.