沈阳大学学报
瀋暘大學學報
침양대학학보
JOURNAL OF SHENYANG UNIVERSITY
2012年
3期
27-31,34
,共6页
陆颖%范世平%鲍永杰%高航
陸穎%範世平%鮑永傑%高航
륙영%범세평%포영걸%고항
航空%铝合金%高速切削%高速铣削%切削力%铣削力%薄壁%加工变形
航空%鋁閤金%高速切削%高速鐉削%切削力%鐉削力%薄壁%加工變形
항공%려합금%고속절삭%고속선삭%절삭력%선삭력%박벽%가공변형
aviation%aluminium alloy%high speed cutting%high speed milling%cutting force%millingforce%thin-wall%machining deformation
试验研究了高速铣削航空铝合金薄壁件侧壁时切削力随铣削工艺参数变化的规律,给出了薄壁件侧壁高速铣削加工变形随铣削工艺参数变化的规律.在此基础上,应用ANSYS软件对航空铝合金薄壁件侧壁高速铣削加工变形进行了有限元分析,进而提出了通过优化铣削工艺参数改善航空铝合金薄壁件高速铣削加工变形的工艺途径.
試驗研究瞭高速鐉削航空鋁閤金薄壁件側壁時切削力隨鐉削工藝參數變化的規律,給齣瞭薄壁件側壁高速鐉削加工變形隨鐉削工藝參數變化的規律.在此基礎上,應用ANSYS軟件對航空鋁閤金薄壁件側壁高速鐉削加工變形進行瞭有限元分析,進而提齣瞭通過優化鐉削工藝參數改善航空鋁閤金薄壁件高速鐉削加工變形的工藝途徑.
시험연구료고속선삭항공려합금박벽건측벽시절삭력수선삭공예삼수변화적규률,급출료박벽건측벽고속선삭가공변형수선삭공예삼수변화적규률.재차기출상,응용ANSYS연건대항공려합금박벽건측벽고속선삭가공변형진행료유한원분석,진이제출료통과우화선삭공예삼수개선항공려합금박벽건고속선삭가공변형적공예도경.
Variation rules of cutting force with milling parameters were studied when high speed milling side wall of aluminium alloy thin-wall components used in aviation. In the experimental study, variation rules of high speed milling deformation of thin-wallcomponents with milling parameters were found out. Based on these, high speed milling deformation of thin-wall components were analyzed by means of finite element method and the software of ANSYS. Further, the process method was brought up to reduce the high speed milling deformation of aluminium alloy thin-wall components used in aviation through optimizing milling parameters.