红外与激光工程
紅外與激光工程
홍외여격광공정
INFRARED AND LASER ENGINEERING
2011年
11期
2229-2232
,共4页
陆强%沈为民%潘君骅%孟洪福%窦文斌
陸彊%瀋為民%潘君驊%孟洪福%竇文斌
륙강%침위민%반군화%맹홍복%두문빈
微波/红外双模%同轴%共孔径%菲涅耳面%光学设计
微波/紅外雙模%同軸%共孔徑%菲涅耳麵%光學設計
미파/홍외쌍모%동축%공공경%비열이면%광학설계
设计了一种新型同轴共孔径微波/红外双模天线,具有探测精度高、体积小、质量轻、成本低等特点,大大提高制导系统的精确定位能力,目标识别能力,全天后能力以及抗干扰能力.采用卡塞格林型式的折反系统,副镜上采用菲涅耳面分离微波和红外波段,在保证微波沿光轴传播的同时,使红外波段聚焦于视场中心,最终分别被微波和红外接收机接收.该双模天线系统的焦距为180mm,全视场角为1.5 °,主镜的口径为150mm,中心视场处空间分辨率高于0.48 mrad,满足实际使用要求.
設計瞭一種新型同軸共孔徑微波/紅外雙模天線,具有探測精度高、體積小、質量輕、成本低等特點,大大提高製導繫統的精確定位能力,目標識彆能力,全天後能力以及抗榦擾能力.採用卡塞格林型式的摺反繫統,副鏡上採用菲涅耳麵分離微波和紅外波段,在保證微波沿光軸傳播的同時,使紅外波段聚焦于視場中心,最終分彆被微波和紅外接收機接收.該雙模天線繫統的焦距為180mm,全視場角為1.5 °,主鏡的口徑為150mm,中心視場處空間分辨率高于0.48 mrad,滿足實際使用要求.
설계료일충신형동축공공경미파/홍외쌍모천선,구유탐측정도고、체적소、질량경、성본저등특점,대대제고제도계통적정학정위능력,목표식별능력,전천후능력이급항간우능력.채용잡새격림형식적절반계통,부경상채용비열이면분리미파화홍외파단,재보증미파연광축전파적동시,사홍외파단취초우시장중심,최종분별피미파화홍외접수궤접수.해쌍모천선계통적초거위180mm,전시장각위1.5 °,주경적구경위150mm,중심시장처공간분변솔고우0.48 mrad,만족실제사용요구.