原子能科学技术
原子能科學技術
원자능과학기술
ATOMIC ENERGY SCIENCE AND TECHNOLOGY
2013年
3期
409-415
,共7页
CPR1000%非能动余热排除系统%RELAP5/MOD3.2%全厂断电%敏感性
CPR1000%非能動餘熱排除繫統%RELAP5/MOD3.2%全廠斷電%敏感性
CPR1000%비능동여열배제계통%RELAP5/MOD3.2%전엄단전%민감성
以中国改进型压水堆核电站CPR1000为研究对象,在其蒸汽发生器二次侧设计了一套非能动余热排出系统(PRHRS),该系统采用在蒸汽发生器二次侧建立自然循环的方式间接带走堆芯余热,确保事故条件下堆芯安全.用RELAP5/MOD3.2程序对系统进行了合理的简化并建模,在全场断电(SBO)事故条件下模拟了PRHRS的瞬态响应过程,并对高位水箱的容积、PRHRS换热器的换热面积、冷热中心高度差以及PRHRS的投入时间等影响PRHRS工作特性的相关参数进行了敏感性分析.计算结果表明:增加高位水箱的容积和增大换热面积均有助于二次侧余热排出系统带走一回路的堆芯余热;降低冷热中心高度差对PRHRS的自然循环能力影响不大;余热排出系统投入时间越早,蒸汽发生器二次侧水位越高,越有利于一次侧余热的排出.
以中國改進型壓水堆覈電站CPR1000為研究對象,在其蒸汽髮生器二次側設計瞭一套非能動餘熱排齣繫統(PRHRS),該繫統採用在蒸汽髮生器二次側建立自然循環的方式間接帶走堆芯餘熱,確保事故條件下堆芯安全.用RELAP5/MOD3.2程序對繫統進行瞭閤理的簡化併建模,在全場斷電(SBO)事故條件下模擬瞭PRHRS的瞬態響應過程,併對高位水箱的容積、PRHRS換熱器的換熱麵積、冷熱中心高度差以及PRHRS的投入時間等影響PRHRS工作特性的相關參數進行瞭敏感性分析.計算結果錶明:增加高位水箱的容積和增大換熱麵積均有助于二次側餘熱排齣繫統帶走一迴路的堆芯餘熱;降低冷熱中心高度差對PRHRS的自然循環能力影響不大;餘熱排齣繫統投入時間越早,蒸汽髮生器二次側水位越高,越有利于一次側餘熱的排齣.
이중국개진형압수퇴핵전참CPR1000위연구대상,재기증기발생기이차측설계료일투비능동여열배출계통(PRHRS),해계통채용재증기발생기이차측건립자연순배적방식간접대주퇴심여열,학보사고조건하퇴심안전.용RELAP5/MOD3.2정서대계통진행료합리적간화병건모,재전장단전(SBO)사고조건하모의료PRHRS적순태향응과정,병대고위수상적용적、PRHRS환열기적환열면적、랭열중심고도차이급PRHRS적투입시간등영향PRHRS공작특성적상관삼수진행료민감성분석.계산결과표명:증가고위수상적용적화증대환열면적균유조우이차측여열배출계통대주일회로적퇴심여열;강저랭열중심고도차대PRHRS적자연순배능력영향불대;여열배출계통투입시간월조,증기발생기이차측수위월고,월유리우일차측여열적배출.