西安交通大学学报
西安交通大學學報
서안교통대학학보
JOURNAL OF XI'AN JIAOTONG UNIVERSITY
2014年
1期
37-41,100
,共6页
褚晓广%张承慧%李珂%孔英%荆业飞
褚曉廣%張承慧%李珂%孔英%荊業飛
저효엄%장승혜%리가%공영%형업비
涡旋膨胀机%结构改造%型线修正%全效率
渦鏇膨脹機%結構改造%型線脩正%全效率
와선팽창궤%결구개조%형선수정%전효솔
scroll expander%structure reformation%profile modification%whole efficiency
针对涡旋膨胀机普遍存在输出功率和气动转化效率相对较低的问题,提出了基于涡旋体型线修正和进口面积调整的2种涡旋膨胀机结构改造方法.以具有圆弧加直线型线结构的涡旋压缩机为例,采用圆渐开线加过渡直线的组合型线修正方法,结合进口面积调整原则完成了涡旋膨胀机改造.试验结果表明:改造后样机全效率最高可达53%,输出功率随供气压力升高而增大,其中550 kPa供气压力时输出功率可达780 W;相同工况下,进口面积增大30%,输出功率增幅可达100 W,全效率提高10%.该结果验证了涡旋膨胀机结构改造方法的有效性,为涡旋膨胀机结构设计和实用化奠定了理论和实践基础.
針對渦鏇膨脹機普遍存在輸齣功率和氣動轉化效率相對較低的問題,提齣瞭基于渦鏇體型線脩正和進口麵積調整的2種渦鏇膨脹機結構改造方法.以具有圓弧加直線型線結構的渦鏇壓縮機為例,採用圓漸開線加過渡直線的組閤型線脩正方法,結閤進口麵積調整原則完成瞭渦鏇膨脹機改造.試驗結果錶明:改造後樣機全效率最高可達53%,輸齣功率隨供氣壓力升高而增大,其中550 kPa供氣壓力時輸齣功率可達780 W;相同工況下,進口麵積增大30%,輸齣功率增幅可達100 W,全效率提高10%.該結果驗證瞭渦鏇膨脹機結構改造方法的有效性,為渦鏇膨脹機結構設計和實用化奠定瞭理論和實踐基礎.
침대와선팽창궤보편존재수출공솔화기동전화효솔상대교저적문제,제출료기우와선체형선수정화진구면적조정적2충와선팽창궤결구개조방법.이구유원호가직선형선결구적와선압축궤위례,채용원점개선가과도직선적조합형선수정방법,결합진구면적조정원칙완성료와선팽창궤개조.시험결과표명:개조후양궤전효솔최고가체53%,수출공솔수공기압력승고이증대,기중550 kPa공기압력시수출공솔가체780 W;상동공황하,진구면적증대30%,수출공솔증폭가체100 W,전효솔제고10%.해결과험증료와선팽창궤결구개조방법적유효성,위와선팽창궤결구설계화실용화전정료이론화실천기출.