机械设计与制造
機械設計與製造
궤계설계여제조
MACHINERY DESIGN & MANUFACTURE
2014年
2期
40-42,45
,共4页
王宇宁%孙志礼%杜永英%杨丽
王宇寧%孫誌禮%杜永英%楊麗
왕우저%손지례%두영영%양려
胶合%瞬态%边界条件%温度场
膠閤%瞬態%邊界條件%溫度場
효합%순태%변계조건%온도장
Scuffing%Transient%Boundary Conditions%Temperature Field
针对传统热胶合计算闪温法和积分温度法的不足,在考虑齿轮初期啮合和实际工况的奈件下,运用有限元方法和传热学理论建立直齿圆柱齿轮模型、加载边界条件并对其瞬态温度场进行仿真,得到了轮齿瞬态温度场的分布云图,研究了温度场的分布规律,得到了轮齿瞬态温度,最后对比了轮齿瞬态温度与闪温理论值.结果表明:闪温法偏于保守,考虑初期啮合的瞬态热胶合分析结果更符合实际工况,为指导齿轮靠性设计热胶合、热应力、热变形等提供了重要依据.
針對傳統熱膠閤計算閃溫法和積分溫度法的不足,在攷慮齒輪初期齧閤和實際工況的奈件下,運用有限元方法和傳熱學理論建立直齒圓柱齒輪模型、加載邊界條件併對其瞬態溫度場進行倣真,得到瞭輪齒瞬態溫度場的分佈雲圖,研究瞭溫度場的分佈規律,得到瞭輪齒瞬態溫度,最後對比瞭輪齒瞬態溫度與閃溫理論值.結果錶明:閃溫法偏于保守,攷慮初期齧閤的瞬態熱膠閤分析結果更符閤實際工況,為指導齒輪靠性設計熱膠閤、熱應力、熱變形等提供瞭重要依據.
침대전통열효합계산섬온법화적분온도법적불족,재고필치륜초기교합화실제공황적내건하,운용유한원방법화전열학이론건립직치원주치륜모형、가재변계조건병대기순태온도장진행방진,득도료륜치순태온도장적분포운도,연구료온도장적분포규률,득도료륜치순태온도,최후대비료륜치순태온도여섬온이론치.결과표명:섬온법편우보수,고필초기교합적순태열효합분석결과경부합실제공황,위지도치륜고성설계열효합、열응력、열변형등제공료중요의거.