CAJ | 학술논문

本文采用两种比表面积不同的碳纤维，取代原有正极铅膏配方中的炭材料作为正极添加剂。采用手工涂膏方式，制备12 V/12 A h阀控式铅酸蓄电池。并研究了正极板化成情况和蓄电池电化学性能。结果表明，比表面积较大的碳纤维更有利于提高蓄电池正极性能。随着碳纤维含量的提高，电池放电时间反而缩短。碳纤维在正极铅膏中最佳添加量为0.5‰。适量碳纤维的添加，对电池化成是有利的。循环伏安测试表明，添加碳纤维会影响正极电化学电位和析氧量。
본문채용량충비표면적불동적탄섬유，취대원유정겁연고배방중적탄재료작위정겁첨가제。채용수공도고방식，제비12 V/12 A h벌공식연산축전지。병연구료정겁판화성정황화축전지전화학성능。결과표명，비표면적교대적탄섬유경유리우제고축전지정겁성능。수착탄섬유함량적제고，전지방전시간반이축단。탄섬유재정겁연고중최가첨가량위0.5‰。괄량탄섬유적첨가，대전지화성시유리적。순배복안측시표명，첨가탄섬유회영향정겁전화학전위화석양량。
Two kinds of carbon fiber were used to replace the carbon material of positive paste as positive electrode additive, and 12 V/12 Ah VRLA batteries are prepared by manually pasting. The electrochemical performance and the formation of positive plate were studied. The results showed that carbon ifber with bigger speciifc surface area was beneifcial to improve the performance of lead-acid battery. The discharge time was decreased with increasing of the added content of carbon ifber. The optima content of carbon ifber was 0.5‰. An appropriate carbon ifber was in favour of the formation of VRLA battery. CV showed that the carbon ifber could affect the electrochemical potentials and the amount of oxygen evolution.