湿法冶金
濕法冶金
습법야금
HYDROMETALLURGY OF CHINA
2014年
1期
20-22
,共3页
孙红燕%森维%孔馨%李富宇
孫紅燕%森維%孔馨%李富宇
손홍연%삼유%공형%리부우
锌烟尘%酸法%浸出%铅%锌
鋅煙塵%痠法%浸齣%鉛%鋅
자연진%산법%침출%연%자
zinc dust%acid%leaching%lead%zinc
研究了用盐酸从炼铅厂烟化段产出的锌烟尘中浸出分离铅和锌,考察了液固体积质量比、盐酸浓度、浸出温度和浸出时间对铅、锌浸出率的影响,确定了最佳浸出参数。试验结果表明:在浸出温度80℃、液固体积质量比8∶1、盐酸浓度6 mol/L最佳条件下,铅和锌的浸出率均大于90%。
研究瞭用鹽痠從煉鉛廠煙化段產齣的鋅煙塵中浸齣分離鉛和鋅,攷察瞭液固體積質量比、鹽痠濃度、浸齣溫度和浸齣時間對鉛、鋅浸齣率的影響,確定瞭最佳浸齣參數。試驗結果錶明:在浸齣溫度80℃、液固體積質量比8∶1、鹽痠濃度6 mol/L最佳條件下,鉛和鋅的浸齣率均大于90%。
연구료용염산종련연엄연화단산출적자연진중침출분리연화자,고찰료액고체적질량비、염산농도、침출온도화침출시간대연、자침출솔적영향,학정료최가침출삼수。시험결과표명:재침출온도80℃、액고체적질량비8∶1、염산농도6 mol/L최가조건하,연화자적침출솔균대우90%。
Leaching of lead and zinc from zinc dusts coming from fuming stage in lead smelter were studied using hydrochloric acid .The effects the ratio between liquid volume and solid mass , concentration of acid ,leaching temperature and leaching time on zinc and lead leaching rates were examined .The results show that under the best conditions of the ratio between liquid volume and solid mass of 8∶1 ,leaching temperature of 80 ℃ and HCl concentration of 6 mol/L ,the leaching of lead and zinc are both more than 90% .