MBR工艺处理垃圾中转站废水的工程实例
MBR공예처리랄급중전참폐수적공정실례
Introduction about MBR Process for the Leachate Treatment in Waste Transfer Station
  • 万方数据
    环境科技 배경과기
    ENVIRONMENTAL SCIENCE AND TECHNOLOGY
    2014年 1期 28-30 ,共3页

    朱卫兵%姜伟立%涂勇%吴海锁%汤晓艳%李月中

    주위병%강위립%도용%오해쇄%탕효염%리월중

    垃圾中转站%渗滤液废水%MBR 垃圾中轉站%滲濾液廢水%MBR
    랄급중전참%삼려액폐수%MBR
    Waste Transfer Station%Leachate%MBR
    采用MBR工艺对某垃圾中转站渗滤液废水进行处理，介绍了工艺流程、主要构筑物及设计参数、工程运行和运行成本情况。运行结果表明，该工艺具有很好的处理效果且运行稳定，出水各项指标均可达到CJ343-2010《污水排入城镇下水道水质标准》中B等级标准要求。
    채용MBR공예대모랄급중전참삼려액폐수진행처리，개소료공예류정、주요구축물급설계삼수、공정운행화운행성본정황。운행결과표명，해공예구유흔호적처리효과차운행은정，출수각항지표균가체도CJ343-2010《오수배입성진하수도수질표준》중B등급표준요구。
    MBR was adopted to deal with the leachate of waste transfer station. The technological process, main structure and design parameters, engineering operation and running cost were introduced. Running results showed that the process had good treatment effect and stable operation. The effluent could reach B grade standards of Wastewater Quality Standard for Discharge to Municipal Sewers (CJ 343-2010).
    원문보기 원문다운로드 사이트로이동
저자의 최근 논문