CAJ | 학술논문

控制系统采用蓝牙模块，主控设备采用STM32F103微控制器，将驾驶盘上触摸按键的信号采集并处理后送入蓝牙芯片进行无线发送；从控设备蓝牙模块接收到主控设备的信号后，从控芯片STM32F103根据不同的信号发送相应的指令通过CAN 总线控制车辆导航、车载音响、车窗升降和车灯照明4大系统的操作，同时在触摸液晶屏显示。通过实验证明，本控制系统使大部分操作在驾驶盘上实现，汽车驾驶更便捷更安全，有较高的应用价值。
공제계통채용람아모괴，주공설비채용STM32F103미공제기，장가사반상촉모안건적신호채집병처리후송입람아심편진행무선발송；종공설비람아모괴접수도주공설비적신호후，종공심편STM32F103근거불동적신호발송상응적지령통과CAN 총선공제차량도항、차재음향、차창승강화차등조명4대계통적조작，동시재촉모액정병현시。통과실험증명，본공제계통사대부분조작재가사반상실현，기차가사경편첩경안전，유교고적응용개치。
The control system uses Bluetooth module,using STM32F103 microcontroller as the master device,after the signal ’s acquisition and processing from touch buttons on the steering wheel,it’s sent to the Bluetooth chip by wireless transmission;when the Bluetooth module from the slave control device receives the signal from the master device,according to different signals,the STM32F103 master chip send the appropriate com-mand signals via CAN bus control vehicle naviga-tion,car audio,window lift,lights illuminated the operation of the four important systems,meanwhile the LCD touch screen displays the corresponding introduction.The experimental result shows that most of the operation of the control system could be implemented on the steering wheel,the system making car driving more convenient and more se-cure,and it has a high application value.