电工电气
電工電氣
전공전기
ELECTROTECHNICS ELECTRIC
2014年
2期
56-60
,共5页
赵蓉%冯智倩%高荣贵%高欣%许强%梁嗣元
趙蓉%馮智倩%高榮貴%高訢%許彊%樑嗣元
조용%풍지천%고영귀%고흔%허강%량사원
变压器%油浸式%负荷%热路模型%运行%光纤光栅%温度测量%油温
變壓器%油浸式%負荷%熱路模型%運行%光纖光柵%溫度測量%油溫
변압기%유침식%부하%열로모형%운행%광섬광책%온도측량%유온
transformer%oil-immersed%load%thermal circuit model%operation%ifber grating%temperature measurement%oil temperature
介绍了传统变压器内部热场的有限元方法模拟热路模型，并在此基础上，增加平均油温、太阳辐射等条件参数，对原有模型进行改进，利用光纤光栅温度测量系统，对变压器样机进行现场温升试验，并将热路修正模型计算结果与几台变压器实测温升数据进行对比，结果验证了该热路修正模型的精确性。
介紹瞭傳統變壓器內部熱場的有限元方法模擬熱路模型，併在此基礎上，增加平均油溫、太暘輻射等條件參數，對原有模型進行改進，利用光纖光柵溫度測量繫統，對變壓器樣機進行現場溫升試驗，併將熱路脩正模型計算結果與幾檯變壓器實測溫升數據進行對比，結果驗證瞭該熱路脩正模型的精確性。
개소료전통변압기내부열장적유한원방법모의열로모형，병재차기출상，증가평균유온、태양복사등조건삼수，대원유모형진행개진，이용광섬광책온도측량계통，대변압기양궤진행현장온승시험，병장열로수정모형계산결과여궤태변압기실측온승수거진행대비，결과험증료해열로수정모형적정학성。
Introduction was made to the ifnite element method of analog thermal circuit model of traditional transformer internal thermal ifeld, and on this basis, average oil temperature, sun radiation etc conditional parameters were added to carry out improvement for the original model. The optical ifber grating temperature measurement system was used to carry out site temperature rise test for sample transformer. This paper car-ried out comparison of thermal circuit amended model calculation result with several transformers actual tested temperature rise data. The result veriifes the correctness of the thermal circuit amended model.
