CAJ | 학술논문

由于换热器表面结垢因素的复杂性和不确定性，影响因素的权重很难确定。文中采用灰色关联分析法对冷却水水质、换热器运行工况以及换热表面结构3个方面各因素影响进行评价研究。结果表明：水质的6种参数中碱度对换热表面污垢沉积影响因素的权重最大，其次是钙离子、电导率、氯离子、浊度，影响最小的是溶解氧；运行工况参数中冷却水进口温度对结垢影响比冷却水进口流速明显；而内螺纹管的表面结构中的螺纹数对污垢的形成影响最突出。
유우환열기표면결구인소적복잡성화불학정성，영향인소적권중흔난학정。문중채용회색관련분석법대냉각수수질、환열기운행공황이급환열표면결구3개방면각인소영향진행평개연구。결과표명：수질적6충삼수중감도대환열표면오구침적영향인소적권중최대，기차시개리자、전도솔、록리자、탁도，영향최소적시용해양；운행공황삼수중냉각수진구온도대결구영향비냉각수진구류속명현；이내라문관적표면결구중적라문수대오구적형성영향최돌출。
Considering the complexity and uncertainty of fouling deposition on heat transfer surface, it is an important research direction to assess the weight of influencing factors. Therefore, the grey relational analysis was applied to analyze and evaluate three influencing factors including quality of cooling water, operating conditions of the heat exchanger and heating surface structure in this paper. Results show that among six kinds of water quality parameters influencing the fouling deposition on heat transfer surface, the most significant factor is the alkalinity, the next is Ca2+, and then electrical conductivity, Cl-, turbidity and dissolved oxygen in order. Among the operating condition parameters, the inlet temperature of cooling water affecting fouling deposition is more serious than the inlet velocity does. Then the number of threads has a great effect on fouling deposition on the surface of ribbed tubes.