电力系统保护与控制
電力繫統保護與控製
전력계통보호여공제
POWER SYSTM PROTECTION AND CONTROL
2014年
1期
139-144
,共6页
兴安直流%直流滤波器%C1不平衡保护%动态段%计数方式
興安直流%直流濾波器%C1不平衡保護%動態段%計數方式
흥안직류%직류려파기%C1불평형보호%동태단%계수방식
Xing-an HVDC%DC filter%C1 unbalance protection%dynamic segment%counting scheme
介绍了兴安直流近年发生的扰动导致C1不平衡保护误动作事件,对扰动波形进行了分析。分析了兴安直流滤波器C1电容器结构特点,C1不平衡保护原理和配置。对C1不平衡保护程序中至关重要的积分功能模块INT进行了分析。为避免C1不平衡保护再次误动作,根据C1电容器不平衡故障的发展过程,提出兴安直流C1电容器不平衡保护修改方案。动态段采用计数方式,可以限制扰动对保护造成的影响,避免误动。根据C1电容器不平衡故障造成的过电压水平,在过电压可承受的范围安排不同的动作出口策略:短路小串数较少,过电压较低时告警出口;短路小串数较多,过电压较高时跳闸出口。
介紹瞭興安直流近年髮生的擾動導緻C1不平衡保護誤動作事件,對擾動波形進行瞭分析。分析瞭興安直流濾波器C1電容器結構特點,C1不平衡保護原理和配置。對C1不平衡保護程序中至關重要的積分功能模塊INT進行瞭分析。為避免C1不平衡保護再次誤動作,根據C1電容器不平衡故障的髮展過程,提齣興安直流C1電容器不平衡保護脩改方案。動態段採用計數方式,可以限製擾動對保護造成的影響,避免誤動。根據C1電容器不平衡故障造成的過電壓水平,在過電壓可承受的範圍安排不同的動作齣口策略:短路小串數較少,過電壓較低時告警齣口;短路小串數較多,過電壓較高時跳閘齣口。
개소료흥안직류근년발생적우동도치C1불평형보호오동작사건,대우동파형진행료분석。분석료흥안직류려파기C1전용기결구특점,C1불평형보호원리화배치。대C1불평형보호정서중지관중요적적분공능모괴INT진행료분석。위피면C1불평형보호재차오동작,근거C1전용기불평형고장적발전과정,제출흥안직류C1전용기불평형보호수개방안。동태단채용계수방식,가이한제우동대보호조성적영향,피면오동。근거C1전용기불평형고장조성적과전압수평,재과전압가승수적범위안배불동적동작출구책략:단로소천수교소,과전압교저시고경출구;단로소천수교다,과전압교고시도갑출구。
This paper introduces the maloperation of C1 unbalance protection caused by disturbance in Xing-an HVDC project in recent years and analyzes the disturbance waveform. The internal structure of DC filter C1 capacitor, the principle and configuration of C1 unbalance protection are analyzed. The function of integration module INT that is vital to C1 unbalance protection program is analyzed. To avoid the C1 unbalance protection maloperation again, according to the development process of C1 capacitor unbalance faults, a modification is proposed for C1 unbalance protection. In the modification, the dynamic segment uses counting scheme to limit the impact of disturbance on the protection and to avoid maloperation. According to the overvoltage level caused by the C1 capacitor unbalance faults, different action strategies are arranged in the acceptable range of overvoltage level. When the number of short-circuit small strings is small and the overvoltage level is relatively low, alarm strategy is adopted; when the number of short-circuit small strings is big and the overvoltage level is relatively high, trip strategy is used.