中国电机工程学报
中國電機工程學報
중국전궤공정학보
ZHONGGUO DIANJI GONGCHENG XUEBAO
2014年
30期
5329-5334
,共6页
郭高朋%胡学浩%温家良%吴广禄
郭高朋%鬍學浩%溫傢良%吳廣祿
곽고붕%호학호%온가량%오엄록
模块化多电平变流器%高压直流输电%电容参数设计%等效电路
模塊化多電平變流器%高壓直流輸電%電容參數設計%等效電路
모괴화다전평변류기%고압직류수전%전용삼수설계%등효전로
modular multilevel converter (MMC)%high- voltage dc (HVDC)%capacitor parameter design%equivalent circuit
研究模块化多电平变流器(modular multilevel converter,MMC)中桥臂的功率特性,并求得桥臂的瞬时功率解析表达式和 MMC 稳态运行时流过桥臂电流的直流分量。通过研究桥臂的等效充放电电路,求出充放电电流的解析表达式,并据此导出电容电压波动分量的解析表达式。根据电容电压波动分量的表达式,画出电容电压波动分量的幅值与调制比和功率因数角的关系曲线,并分析波动分量的来源及特性,求取波动分量的幅值与调制比和功率因数角的解析表达式,进而提出电容大小的设计方法。通过算例验证了电容电压波动分量的表达式和电容设计方法的正确性。
研究模塊化多電平變流器(modular multilevel converter,MMC)中橋臂的功率特性,併求得橋臂的瞬時功率解析錶達式和 MMC 穩態運行時流過橋臂電流的直流分量。通過研究橋臂的等效充放電電路,求齣充放電電流的解析錶達式,併據此導齣電容電壓波動分量的解析錶達式。根據電容電壓波動分量的錶達式,畫齣電容電壓波動分量的幅值與調製比和功率因數角的關繫麯線,併分析波動分量的來源及特性,求取波動分量的幅值與調製比和功率因數角的解析錶達式,進而提齣電容大小的設計方法。通過算例驗證瞭電容電壓波動分量的錶達式和電容設計方法的正確性。
연구모괴화다전평변류기(modular multilevel converter,MMC)중교비적공솔특성,병구득교비적순시공솔해석표체식화 MMC 은태운행시류과교비전류적직류분량。통과연구교비적등효충방전전로,구출충방전전류적해석표체식,병거차도출전용전압파동분량적해석표체식。근거전용전압파동분량적표체식,화출전용전압파동분량적폭치여조제비화공솔인수각적관계곡선,병분석파동분량적래원급특성,구취파동분량적폭치여조제비화공솔인수각적해석표체식,진이제출전용대소적설계방법。통과산례험증료전용전압파동분량적표체식화전용설계방법적정학성。
In this paper, the power characteristics of the arm in the Modular Multilevel converter (MMC) was studied, and the mathematical equation of the instantaneous power of the arm and the DC component of the arm current were acquired. By studying the equivalent circuit of the capacitor charge circuit, the mathematical equation of the equivalent charge current and capacitor AC voltage component were acquired. Based on the mathematical equation of the capacitor AC voltage component, the relationship of magnitude of B with modulate ratio and power factor angle were acquired. Furthermore, the mathematical equation of the magnitude of capacitor AC voltage component were worked out and the design approach of the sub-module capacitor were put forward. The simulation results show the accuracy of the mathematical equation of capacitor AC voltage component and the design approach of the sub-module capacitor.