太原科技大学学报
太原科技大學學報
태원과기대학학보
JOURNAL OF TAIYUAN UNIVERSITY OF SCIENCE AND TECHNOLOGY
2012年
4期
306-310
,共5页
大型锻造用钢锭%凝固过程%数值模拟%疏松
大型鍛造用鋼錠%凝固過程%數值模擬%疏鬆
대형단조용강정%응고과정%수치모의%소송
large forging steel ingots%solidification process%numerical simulation%porosity
利用有限元软件ProCast对大型锻造用钢锭的非稳态浇注过程和凝固过程进行了数值模拟。对两种不同的浇注工艺方案,通过温度场和固相场,分析了采用双包浇注时不同浇注温度对凝固过程和疏松形成规律的影响。结果发现:后浇包的浇注温度低,加快了钢锭上部的凝固,降低了冒口的补缩能力,导致疏松缺陷偏下,数值模拟与实验结果基本吻合。而方案2模拟的疏松缺陷向冒口处上移92mm,更有利于钢锭锻造过程中对疏松缺陷的消除。
利用有限元軟件ProCast對大型鍛造用鋼錠的非穩態澆註過程和凝固過程進行瞭數值模擬。對兩種不同的澆註工藝方案,通過溫度場和固相場,分析瞭採用雙包澆註時不同澆註溫度對凝固過程和疏鬆形成規律的影響。結果髮現:後澆包的澆註溫度低,加快瞭鋼錠上部的凝固,降低瞭冒口的補縮能力,導緻疏鬆缺陷偏下,數值模擬與實驗結果基本吻閤。而方案2模擬的疏鬆缺陷嚮冒口處上移92mm,更有利于鋼錠鍛造過程中對疏鬆缺陷的消除。
이용유한원연건ProCast대대형단조용강정적비은태요주과정화응고과정진행료수치모의。대량충불동적요주공예방안,통과온도장화고상장,분석료채용쌍포요주시불동요주온도대응고과정화소송형성규률적영향。결과발현:후요포적요주온도저,가쾌료강정상부적응고,강저료모구적보축능력,도치소송결함편하,수치모의여실험결과기본문합。이방안2모의적소송결함향모구처상이92mm,경유리우강정단조과정중대소송결함적소제。
A 234-ton large forging steel ingot has been simulated by using professional numerical software ProCast. During the two schemes of different casting process, the influences of pouring temperatures on casting processes and porosity defects in two-ladle casting process were analyzed by using the temperature field and solid fraction. The simulating and experimental results show that:When the pouting temperature of the second ladle is lower, the solidification of the upper part of the steel ingot is faster so that the ability of riser feeding can be reduced and the locations of the porosity defects can be decreased in the steel ingot. The simulation results are identical to the ex- perimental results. But the porosity defects in the second scheme move upward to the riser line about 92 mm due to the same pouring temperature in the second scheme, which is beneficial to eliminate the porosity defects in the ingot during forging processes.