精密成形工程
精密成形工程
정밀성형공정
METAL FORMING TECHNOLOGY
2012年
6期
5-8,109
,共5页
乔硕%刘国凯%周结魁%薛克敏
喬碩%劉國凱%週結魁%薛剋敏
교석%류국개%주결괴%설극민
行星齿轮%液压模架%闭塞式锻造%数值模拟
行星齒輪%液壓模架%閉塞式鍛造%數值模擬
행성치륜%액압모가%폐새식단조%수치모의
planetary gear%hydraulic die set%closed die forging%numerical simulation
针对行星齿轮,研究了基于液压模架的行星齿轮冷闭塞式锻造工艺。应用Deform-3D软件对闭塞式锻造过程进行数值模拟,分析了该工艺的成形效果和载荷情况;引入分流型腔结构,降低了成形载荷。试验验证了该工艺的合理可行性。
針對行星齒輪,研究瞭基于液壓模架的行星齒輪冷閉塞式鍛造工藝。應用Deform-3D軟件對閉塞式鍛造過程進行數值模擬,分析瞭該工藝的成形效果和載荷情況;引入分流型腔結構,降低瞭成形載荷。試驗驗證瞭該工藝的閤理可行性。
침대행성치륜,연구료기우액압모가적행성치륜랭폐새식단조공예。응용Deform-3D연건대폐새식단조과정진행수치모의,분석료해공예적성형효과화재하정황;인입분류형강결구,강저료성형재하。시험험증료해공예적합리가행성。
The closed die forging of bevel gear based on hydraulic die-set was studied to planetary gear. The closed die forging process was simulated by a metal forming finite element software Deform-3D. Forming effect and load were analyzed. By in-troducing the divided flow cavity, the forming load was decreased. The experiment confirmed the feasibility of the process.