汽车工程师
汽車工程師
기차공정사
TIANJIN AUTO
2012年
9期
43-45,48
,共4页
门锁控制器%汽车电子%电瞬态传导%IS07637－2：2004
門鎖控製器%汽車電子%電瞬態傳導%IS07637－2：2004
문쇄공제기%기차전자%전순태전도%IS07637－2：2004
Door lock controller%Automotive electronics%Electrical transient conduction%ISO7637-2:2004
为检测门锁控制器在沿电源线的电瞬态传导抗扰方面的能力，文章阐述了门锁控制器沿电源线的电瞬态传导抗扰测试平台的搭建和测试步骤，并对门锁控制器进行沿电源线的电瞬态传导抗扰试验，试验结果表明：施加骚扰脉冲1期间门锁控制器不能正常工作；施加骚扰脉冲1之后及施加骚扰脉冲2a，3a，3b期间及之后门锁控制器均能正常工作。
為檢測門鎖控製器在沿電源線的電瞬態傳導抗擾方麵的能力，文章闡述瞭門鎖控製器沿電源線的電瞬態傳導抗擾測試平檯的搭建和測試步驟，併對門鎖控製器進行沿電源線的電瞬態傳導抗擾試驗，試驗結果錶明：施加騷擾脈遲1期間門鎖控製器不能正常工作；施加騷擾脈遲1之後及施加騷擾脈遲2a，3a，3b期間及之後門鎖控製器均能正常工作。
위검측문쇄공제기재연전원선적전순태전도항우방면적능력，문장천술료문쇄공제기연전원선적전순태전도항우측시평태적탑건화측시보취，병대문쇄공제기진행연전원선적전순태전도항우시험，시험결과표명：시가소우맥충1기간문쇄공제기불능정상공작；시가소우맥충1지후급시가소우맥충2a，3a，3b기간급지후문쇄공제기균능정상공작。
Abstract:In order to test the performance of electrical transient conduction immunity of door lock controller, the paper introduces the establishment and test steps of the platform for electrical transient conduction immunity and also tests electrical transient conduction immunity along the supply lines. The results show that door controller cannot work normally when hurst disturbanee 1 is applied: and after the burst disturbance 1 as well as when burst disturbances 2a,3a and 3b are applied, the door lock controller can work normally. Analyzing the test results and based on rules of ISO7637-2:2004 the test results are evaluated, at the same lime the requirements of product design is satisfied according to the working condition of door lock controller.
