航天制造技术
航天製造技術
항천제조기술
HANGTIAN ZHIXAO JI SHU
2013年
6期
1-5
,共5页
赵京晨%燕平%彭艳锋%孟祥炜%肖文丰%李曙光%张龙飞%陈兴福
趙京晨%燕平%彭豔鋒%孟祥煒%肖文豐%李曙光%張龍飛%陳興福
조경신%연평%팽염봉%맹상위%초문봉%리서광%장룡비%진흥복
铸造高温合金%细晶组织%铸造技术
鑄造高溫閤金%細晶組織%鑄造技術
주조고온합금%세정조직%주조기술
cast superalloy%fine grain%cast technology
常规的铸造组织存在细等轴晶、柱状晶和粗等轴晶三种晶区。采用新方法铸造出来的高温合金铸造组织是分布于整个铸造截面区域内的均匀细等轴晶组织,它不仅晶粒度可以细小得达到锻造晶粒度,且没有织构或流线。与传统的高温合金细晶铸造相比,因为它注入型腔的不是传统细晶铸造的粥状液体--固、液混合体,而是在工业上首次应用的过冷至熔点以下的单相金属液体,因此具有超强的充型能力。
常規的鑄造組織存在細等軸晶、柱狀晶和粗等軸晶三種晶區。採用新方法鑄造齣來的高溫閤金鑄造組織是分佈于整箇鑄造截麵區域內的均勻細等軸晶組織,它不僅晶粒度可以細小得達到鍛造晶粒度,且沒有織構或流線。與傳統的高溫閤金細晶鑄造相比,因為它註入型腔的不是傳統細晶鑄造的粥狀液體--固、液混閤體,而是在工業上首次應用的過冷至鎔點以下的單相金屬液體,因此具有超彊的充型能力。
상규적주조조직존재세등축정、주상정화조등축정삼충정구。채용신방법주조출래적고온합금주조조직시분포우정개주조절면구역내적균균세등축정조직,타불부정립도가이세소득체도단조정립도,차몰유직구혹류선。여전통적고온합금세정주조상비,인위타주입형강적불시전통세정주조적죽상액체--고、액혼합체,이시재공업상수차응용적과랭지용점이하적단상금속액체,인차구유초강적충형능력。
In general, there are three kinds of grains existing in conventional superalloy castings:equiaxed fine grains, columnar grains and equiaxed coarse grains. The new idea and advanced technology innovated by this study was employed to make the superalloy castings with equiaxed fine grains evenly over the whole castings. The grain sizes of the castings are as fine as those in forgings and with no directional features. Furthermore, because the pouring metal liquid was not a mixture of solid/liquid as occurred in traditional processing of fine grain castings, but the pure liquid state with deeper undercooling, the liquid possess super-capability to fill complicated casting moulds.