高电压技术
高電壓技術
고전압기술
HIGH VOLTAGE ENGINEERING
2013年
11期
2836-2844
,共9页
吕锦柏%王毅%常广%肖建涛%谢将剑
呂錦柏%王毅%常廣%肖建濤%謝將劍
려금백%왕의%상엄%초건도%사장검
变电压变输出能量%永磁操动机构%真空断路器%滞环控制%曲线拟合%分散性%分段拟合
變電壓變輸齣能量%永磁操動機構%真空斷路器%滯環控製%麯線擬閤%分散性%分段擬閤
변전압변수출능량%영자조동궤구%진공단로기%체배공제%곡선의합%분산성%분단의합
varying voltage and varying output energy%permanent magnetic actuator%vacuum circuit breaker%hysteresis control%curve fitting%dispersion%section fitting
为减小永磁真空断路器分合闸时间的分散性,改善其操作时动触头的运动特性,提出了变电压变输出能量(VVVE)优化方法.分析了开环控制时永磁机构的线圈电流特性,给出了电流的拟合方程及电流曲线的优化方法.在保持电容输出能量不变的情况下,通过类似改变储能电容初始电压(VV)的机制实现对断路器合闸时间的粗调.通过改变电容输出能量(VE)以及类似保持电容初始电压不变的机制实现对合闸时间的微调.采用改进型滞环控制的方法,控制线圈电流与参考曲线一致,实现了对断路器动触头运动特性的优化.基于上述方法设计了相应的控制器,在不同的电容初始电压下,对12 kV永磁真空断路器进行了合闸实验.实验结果表明,优化后的合闸时间比原开环控制的合闸时间缩短了约4 ms,且偏差≤0.3 ms;动触头的刚合速度比原额定开环控制时降低了5%.因此,所提出的方法能够使合闸时间保持良好的一致性,加快了断路器的合闸过程,降低了触头碰撞能量,较大地改善了动触头的运动特性.
為減小永磁真空斷路器分閤閘時間的分散性,改善其操作時動觸頭的運動特性,提齣瞭變電壓變輸齣能量(VVVE)優化方法.分析瞭開環控製時永磁機構的線圈電流特性,給齣瞭電流的擬閤方程及電流麯線的優化方法.在保持電容輸齣能量不變的情況下,通過類似改變儲能電容初始電壓(VV)的機製實現對斷路器閤閘時間的粗調.通過改變電容輸齣能量(VE)以及類似保持電容初始電壓不變的機製實現對閤閘時間的微調.採用改進型滯環控製的方法,控製線圈電流與參攷麯線一緻,實現瞭對斷路器動觸頭運動特性的優化.基于上述方法設計瞭相應的控製器,在不同的電容初始電壓下,對12 kV永磁真空斷路器進行瞭閤閘實驗.實驗結果錶明,優化後的閤閘時間比原開環控製的閤閘時間縮短瞭約4 ms,且偏差≤0.3 ms;動觸頭的剛閤速度比原額定開環控製時降低瞭5%.因此,所提齣的方法能夠使閤閘時間保持良好的一緻性,加快瞭斷路器的閤閘過程,降低瞭觸頭踫撞能量,較大地改善瞭動觸頭的運動特性.
위감소영자진공단로기분합갑시간적분산성,개선기조작시동촉두적운동특성,제출료변전압변수출능량(VVVE)우화방법.분석료개배공제시영자궤구적선권전류특성,급출료전류적의합방정급전류곡선적우화방법.재보지전용수출능량불변적정황하,통과유사개변저능전용초시전압(VV)적궤제실현대단로기합갑시간적조조.통과개변전용수출능량(VE)이급유사보지전용초시전압불변적궤제실현대합갑시간적미조.채용개진형체배공제적방법,공제선권전류여삼고곡선일치,실현료대단로기동촉두운동특성적우화.기우상술방법설계료상응적공제기,재불동적전용초시전압하,대12 kV영자진공단로기진행료합갑실험.실험결과표명,우화후적합갑시간비원개배공제적합갑시간축단료약4 ms,차편차≤0.3 ms;동촉두적강합속도비원액정개배공제시강저료5%.인차,소제출적방법능구사합갑시간보지량호적일치성,가쾌료단로기적합갑과정,강저료촉두팽당능량,교대지개선료동촉두적운동특성.