工程塑料应用
工程塑料應用
공정소료응용
ENGINEERING PLASTICS APPLICATION
2014年
3期
57-61
,共5页
双波螺杆%振动力场%混炼性能%数值模拟
雙波螺桿%振動力場%混煉性能%數值模擬
쌍파라간%진동력장%혼련성능%수치모의
double wave screw%vibration force field%mixing efficiency%numerical simulation
借助于三维数值模拟思想,对双波螺杆混炼段构建物理简化模型,并应用聚合物流动分析软件POLYFLOW及粒子示踪法对比研究该混炼段在稳态与动态条件下的混炼性能。结果表明,双波螺杆螺槽的特殊结构导致熔体粒子各流场参数波动周期性变化;引入振动场可使熔体粒子受到的压力和作用力降低,并可使流场获得稳定的黏度;存在最佳振动强度,使得波状螺槽内熔体粒子受到剪切作用达到最大值及粒子受力实现稳定降低。
藉助于三維數值模擬思想,對雙波螺桿混煉段構建物理簡化模型,併應用聚閤物流動分析軟件POLYFLOW及粒子示蹤法對比研究該混煉段在穩態與動態條件下的混煉性能。結果錶明,雙波螺桿螺槽的特殊結構導緻鎔體粒子各流場參數波動週期性變化;引入振動場可使鎔體粒子受到的壓力和作用力降低,併可使流場穫得穩定的黏度;存在最佳振動彊度,使得波狀螺槽內鎔體粒子受到剪切作用達到最大值及粒子受力實現穩定降低。
차조우삼유수치모의사상,대쌍파라간혼련단구건물리간화모형,병응용취합물류동분석연건POLYFLOW급입자시종법대비연구해혼련단재은태여동태조건하적혼련성능。결과표명,쌍파라간라조적특수결구도치용체입자각류장삼수파동주기성변화;인입진동장가사용체입자수도적압력화작용력강저,병가사류장획득은정적점도;존재최가진동강도,사득파상라조내용체입자수도전절작용체도최대치급입자수력실현은정강저。
With CFD software POLYFLOW,simplified models for double wave screw unit was built,three dimensional numerical simulation was carried out. And finally,using particle tracing manner,the mixing behavior of wave screw mixing unit with and without vibration force field was comparatively analysed. The results show that flow field parameters of the tracing particles change wave-like and periodically due to its special groove structure. Introducing vibration force field can lower the pressure and the acting force that the particles suffer,as well as steady viscosity.There is some vibration intensity for the best shearing action and steadily lowering action force that those melt particles undergo in wave screw groove.