工程塑料应用
工程塑料應用
공정소료응용
ENGINEERING PLASTICS APPLICATION
2013年
11期
60-62,63
,共4页
黄殿凯%徐健伟%李进%骆志高
黃殿凱%徐健偉%李進%駱誌高
황전개%서건위%리진%락지고
聚醚砜%压制成型%金属塑料复合材料%结合强度
聚醚砜%壓製成型%金屬塑料複閤材料%結閤彊度
취미풍%압제성형%금속소료복합재료%결합강도
polyethersulfone%compression molding%metal-plastic composite%bonding strength
利用聚醚砜(PES)与金属间结合性能高的特点,采用模压成型的工艺,制备了一种PES/金属复合材料。通过划痕实验对材料的结合性能进行了研究,并利用整个划刻过程的声发射信号的监测来确定涂层被破坏时的临界载荷值。结果表明,采用模压成型法能制得结合性能优良的复合材料。
利用聚醚砜(PES)與金屬間結閤性能高的特點,採用模壓成型的工藝,製備瞭一種PES/金屬複閤材料。通過劃痕實驗對材料的結閤性能進行瞭研究,併利用整箇劃刻過程的聲髮射信號的鑑測來確定塗層被破壞時的臨界載荷值。結果錶明,採用模壓成型法能製得結閤性能優良的複閤材料。
이용취미풍(PES)여금속간결합성능고적특점,채용모압성형적공예,제비료일충PES/금속복합재료。통과화흔실험대재료적결합성능진행료연구,병이용정개화각과정적성발사신호적감측래학정도층피파배시적림계재하치。결과표명,채용모압성형법능제득결합성능우량적복합재료。
A kind of polyethersulfone(PES)/metal composite was made by compression molding process based on good bonding property between PES and metal. The bonding ability of composite material was discussed through scratch test and the critical load value which damaged the coating was obtained by monitoring the acoustic emission signal during scratch test. The results show that the composite which has excellent bonding property can be made by compression molding process.