湖南造纸
湖南造紙
호남조지
HUNAN PAPERMAKING
2012年
1期
24-26
,共3页
脱墨剂%脱墨浆%残余油墨%白度
脫墨劑%脫墨漿%殘餘油墨%白度
탈묵제%탈묵장%잔여유묵%백도
deinking agent%DIP%residual ink%whiteness
为了降低废纸脱墨的成本，在生产中用新型脱墨剂来代替现用脱墨剂。通过实验，对工艺流程中不同测量点的脱墨浆进行物理性能分析，实验结果证明在生产系统成浆质量稳定提高的前提下，新型脱墨剂用量比现用脱墨剂用量降低，可以有效替代现用脱墨荆。
為瞭降低廢紙脫墨的成本，在生產中用新型脫墨劑來代替現用脫墨劑。通過實驗，對工藝流程中不同測量點的脫墨漿進行物理性能分析，實驗結果證明在生產繫統成漿質量穩定提高的前提下，新型脫墨劑用量比現用脫墨劑用量降低，可以有效替代現用脫墨荊。
위료강저폐지탈묵적성본，재생산중용신형탈묵제래대체현용탈묵제。통과실험，대공예류정중불동측량점적탈묵장진행물이성능분석，실험결과증명재생산계통성장질량은정제고적전제하，신형탈묵제용량비현용탈묵제용량강저，가이유효체대현용탈묵형。
In order to reduce the cost of waste paper deinking, the new deinking agent was used instead of the existing process. Through the experiment, the de-inked pulp of different measurement points was analysised. The results showed the usefulness of the new deinking angent. Meanwhile, the quality of de-inked pulp keeps the stability as the prior. The used amount of the new deinking agent was lower than the current technology. So, the new deinking agent could replace the current technology.
