中国光学
中國光學
중국광학
CHINESE JOURNAL OF OPTICS
2012年
1期
77-82
,共6页
光纤通信%4.25Gbps光模块%光发射组件%光接收组件%消光比
光纖通信%4.25Gbps光模塊%光髮射組件%光接收組件%消光比
광섬통신%4.25Gbps광모괴%광발사조건%광접수조건%소광비
optical fiber communication%4.25 Gbps optical module%Transmitter Optical Subassembly(TOSA)%Receiver Optical Subassembly(ROSA)%extinction ratio
对4.25 Gbps小型化可热插拔(SFP)光收发模块的关键参数进行了理论分析,从发射、接收和控制3个方面讨论了模块的结构组成,设计出了符合SFP MSA及SFF-8472协议的光模块,并根据此设计方案制作了样品模块。在-40,25,85℃环境温度下测试和分析了模块的性能指标,结果显示其光功率、消光比和灵敏度等均符合设计要求,且在适用温度范围内表现出良好的稳定性。实验证实了方案的可行性,为模块的产品化提供了参考。
對4.25 Gbps小型化可熱插拔(SFP)光收髮模塊的關鍵參數進行瞭理論分析,從髮射、接收和控製3箇方麵討論瞭模塊的結構組成,設計齣瞭符閤SFP MSA及SFF-8472協議的光模塊,併根據此設計方案製作瞭樣品模塊。在-40,25,85℃環境溫度下測試和分析瞭模塊的性能指標,結果顯示其光功率、消光比和靈敏度等均符閤設計要求,且在適用溫度範圍內錶現齣良好的穩定性。實驗證實瞭方案的可行性,為模塊的產品化提供瞭參攷。
대4.25 Gbps소형화가열삽발(SFP)광수발모괴적관건삼수진행료이론분석,종발사、접수화공제3개방면토론료모괴적결구조성,설계출료부합SFP MSA급SFF-8472협의적광모괴,병근거차설계방안제작료양품모괴。재-40,25,85℃배경온도하측시화분석료모괴적성능지표,결과현시기광공솔、소광비화령민도등균부합설계요구,차재괄용온도범위내표현출량호적은정성。실험증실료방안적가행성,위모괴적산품화제공료삼고。
By taking 4.25 Gbps Small Form-factor Pluggable(SFP) as an example,this paper analyzes theoretically its key parameters in detail,and discusses the module structure composition from the transmitter,receiver and the control part.Then it designs the optical module according to the SFP MSA and SFF-8472 agreement.On the basis of the design,some sample optical transceiver modules are designed.Finally,the optical power,extinction ratio,sensitivity and other performance indicators of the module are tested at-40,25,85 ℃,and results indicate that these parameters meet the design requirements,and show good stability in a suitable temperature range.The feasibility of the design is confirmed by experiments,which provides a reference for the actual production of modules.