CAJ | 학술논문

选择在可见光波段具有较低吸收损耗的聚甲基丙烯酸甲酯-甲基丙烯酸环氧丙酯[P（MMA-GMA）]共聚物作为波导包层材料,使用双酚A型环氧树脂作为折射率调节剂,根据材料的折射率设计了单模波导截面尺寸;然后,采用束传播法优化设计出16信道阵列波导光栅（AWG）器件的版图结构。利用Optiwave软件模拟了AWG器件的光传输特性,结果显示,器件的信道间隔为0.845 01 nm,插入损耗小于14 dB,串扰小于-25 dB。
선택재가견광파단구유교저흡수손모적취갑기병희산갑지-갑기병희산배양병지[P（MMA-GMA）]공취물작위파도포층재료,사용쌍분A형배양수지작위절사솔조절제,근거재료적절사솔설계료단모파도절면척촌;연후,채용속전파법우화설계출16신도진렬파도광책（AWG）기건적판도결구。이용Optiwave연건모의료AWG기건적광전수특성,결과현시,기건적신도간격위0.845 01 nm,삽입손모소우14 dB,천우소우-25 dB。
By choosing Polymethyl Methacrylate-glycidyl Methacrylate[P（MMA-GMA）] with a low absorption loss at 650 nm as the cladding material of a waveguide,and taking the bisphenol A epoxy resin as the refractive index modifier,the cross section size of a single mode waveguide was designed according to the refractive index of the cladding and core material.Then the layout of a 16-channel Arrayed Waveguide Grating（AWG） was designed and optimized using beam propagation method.The Optiwave software was used to simulate the optical propagation characteristics of the AWG,and results show that the channel spacing is 0.845 01 nm,the device insertion loss is less than 14 dB,and the crosstalk is less than-25 dB.