CAJ | 학술논문

汽车起重机的臂架涂装线按传统的涂装工艺需要占用很长厂房，采用“湿碰湿”余装工艺可以节省厂房面积和能源消耗。通过对涂料的喷涂黏度、漆膜厚度、底材温度等工艺参数的调整，实现了臂架的“湿碰湿”涂装工艺，漆膜质量优于传统涂装工艺，同时提高了涂装效率，减少了能源浪费。
기차기중궤적비가도장선안전통적도장공예수요점용흔장엄방，채용“습팽습”여장공예가이절성엄방면적화능원소모。통과대도료적분도점도、칠막후도、저재온도등공예삼수적조정，실현료비가적“습팽습”도장공예，칠막질량우우전통도장공예，동시제고료도장효솔，감소료능원낭비。
The traditional painting process of truck crane jib needs a long factory. However, the ＂wet on wet＂ painting process can save plant space and energy consumption. This painting process was realized by adjusting the spraying viscosity, film thickness and substrate temperature. The film quality is Belier than the traditional painting process. Meanwhile, the painting efficiency was improved and energy consumption was reduced.