CAJ | 학술논문

柱形压力容器缠绕通常要求两端开孔大小相近，在缠绕工艺实施上可以通过平衡缠绕角度的方法实现稳定落纱，当两端开孔相差较大时，常用的螺旋向缠绕将无法实现；针对这一问题，本文提出一种针对不等开口、大长径比的柱形压力容器缠绕线形设计方法，通过筒身段的渐变缠绕角度设计和公式推导，实现了纤维的稳定落纱和筒身螺旋缠绕段的均匀过渡；通过对不等开孔柱形容器样件缠绕工艺实现表明，该设计方法具有良好的实用效果。
주형압력용기전요통상요구량단개공대소상근，재전요공예실시상가이통과평형전요각도적방법실현은정락사，당량단개공상차교대시，상용적라선향전요장무법실현；침대저일문제，본문제출일충침대불등개구、대장경비적주형압력용기전요선형설계방법，통과통신단적점변전요각도설계화공식추도，실현료섬유적은정락사화통신라선전요단적균균과도；통과대불등개공주형용기양건전요공예실현표명，해설계방법구유량호적실용효과。
Cylinder pressure vessel common requires similar size holes at the vessel＇ s two - side, so it can attach stable fiber doffing by means of balance fiber wingding angle, if the two - sided hole get differ than ever , conventional spiral wind- ing will not be effective. According to this problem, a wound format design method has been suggested about the unequal - hole and big slenderness taro＇ s cylinder pressure vessel in this paper, through gradual angle winding design and formula de- duce, stable fiber doffing and gradual spiral winding stage have been accomplished. By the process implementation of une- qual - hole test cylinder pressure vessel,it will be found that the effectiveness of the proposed approach is validated.