CAJ | 학술논문

酸性光亮镀铜工艺中氯离子的含量直接影响镀层的光亮度,控制镀铜液中氯离子含量对酸性光亮镀铜工艺具有重要的实际意义。本实验采用实际镀铜液,考察了比浊法测定氯离子条件,以及温度、反应实验、铜粉加入量对氯离子的去除效果。实验结果表明：氯离子的最佳去除条件为反应温度为50℃,反应时间10 min,铜粉用量为0.4 g时,对氯离子去除率为55.52%,控制镀铜液中氯离子浓度50 mg/L左右。
산성광량도동공예중록리자적함량직접영향도층적광량도,공제도동액중록리자함량대산성광량도동공예구유중요적실제의의。본실험채용실제도동액,고찰료비탁법측정록리자조건,이급온도、반응실험、동분가입량대록리자적거제효과。실험결과표명：록리자적최가거제조건위반응온도위50℃,반응시간10 min,동분용량위0.4 g시,대록리자거제솔위55.52%,공제도동액중록리자농도50 mg/L좌우。
The concentration of chloride has a direct influence on the radiance in the copper planting technology.Adjusting the concentration of chloride has an important application.In the paper,the determination condition of turbidimetry and the effect of removal chloride by temperature,time and amount of copper power are investigated.The result shows that the best removal rate of chloride is that the rate reach 55.52 % after added the 0.4 g of copper powder,at 50 ℃ and the reaction time was 10 min.