现代纺织技术
現代紡織技術
현대방직기술
Advanced Textile Technology
2013年
4期
8-10
,共3页
张钟楷%汪进前%盖燕芳%张小燕%张锡均
張鐘楷%汪進前%蓋燕芳%張小燕%張錫均
장종해%왕진전%개연방%장소연%장석균
纳米氧化锌%表面改性%钛酸酯偶联剂%机械搅拌分散
納米氧化鋅%錶麵改性%鈦痠酯偶聯劑%機械攪拌分散
납미양화자%표면개성%태산지우련제%궤계교반분산
以钛酸酯偶联剂作为改性剂,采用机械搅拌分散的方法对纳米氧化锌(ZnO)进行表面改性.研究了偶联剂用量、反应时间、反应温度和pH值对纳米ZnO改性的影响.通过活化指数实验、傅里叶红外分光光度法(FT-IR)和场发射扫描电子显微镜(FE-SEM)等表征方法对纳米ZnO的改性效果进行了表征.实验结果表明,通过钛酸酯偶联剂对纳米ZnO的改性,其分散性得到了有效的提高.最佳工艺条件为:钛酸酯偶联剂用量为3%、反应时间为2h、反应温度为45℃、pH为6.
以鈦痠酯偶聯劑作為改性劑,採用機械攪拌分散的方法對納米氧化鋅(ZnO)進行錶麵改性.研究瞭偶聯劑用量、反應時間、反應溫度和pH值對納米ZnO改性的影響.通過活化指數實驗、傅裏葉紅外分光光度法(FT-IR)和場髮射掃描電子顯微鏡(FE-SEM)等錶徵方法對納米ZnO的改性效果進行瞭錶徵.實驗結果錶明,通過鈦痠酯偶聯劑對納米ZnO的改性,其分散性得到瞭有效的提高.最佳工藝條件為:鈦痠酯偶聯劑用量為3%、反應時間為2h、反應溫度為45℃、pH為6.
이태산지우련제작위개성제,채용궤계교반분산적방법대납미양화자(ZnO)진행표면개성.연구료우련제용량、반응시간、반응온도화pH치대납미ZnO개성적영향.통과활화지수실험、부리협홍외분광광도법(FT-IR)화장발사소묘전자현미경(FE-SEM)등표정방법대납미ZnO적개성효과진행료표정.실험결과표명,통과태산지우련제대납미ZnO적개성,기분산성득도료유효적제고.최가공예조건위:태산지우련제용량위3%、반응시간위2h、반응온도위45℃、pH위6.