中华纸业
中華紙業
중화지업
CHINA PULP & PAPER INDUSTRY
2013年
22期
50-53
,共4页
废水%改良式氧化沟%射流曝气%工程实例%系统故障%解决措施
廢水%改良式氧化溝%射流曝氣%工程實例%繫統故障%解決措施
폐수%개량식양화구%사류폭기%공정실례%계통고장%해결조시
waste water%improved oxidation ditch%jet aeration%project example%system failure%solutions
甘肃某造纸企业采用改良式氧化沟工艺及射流曝气系统处理中段废水,由于产能扩建、生产不稳定等原因造成浅层气浮加药量不易控制、曝气池产生大量泡沫、二沉池出现漂泥现象等一系列问题,通过加大初期排泥、增加溶解氧供应、减少回流污泥等措施,取得了满意的效果。
甘肅某造紙企業採用改良式氧化溝工藝及射流曝氣繫統處理中段廢水,由于產能擴建、生產不穩定等原因造成淺層氣浮加藥量不易控製、曝氣池產生大量泡沫、二沉池齣現漂泥現象等一繫列問題,通過加大初期排泥、增加溶解氧供應、減少迴流汙泥等措施,取得瞭滿意的效果。
감숙모조지기업채용개량식양화구공예급사류폭기계통처리중단폐수,유우산능확건、생산불은정등원인조성천층기부가약량불역공제、폭기지산생대량포말、이침지출현표니현상등일계렬문제,통과가대초기배니、증가용해양공응、감소회류오니등조시,취득료만의적효과。
Improved oxidation ditch process and jet aeration system was adopted to treat washing and bleaching eflfuent in a paper mill in Gansu. Enlarging of productive capacity and unstable production result in the problems of uneasy control of chemical dosage in shallow air lfotation system, great quantities of foam occurring in aeration tank and sludge lfoating in the secondary sedimentation tank, which were solved by increasing sludge discharge in the early stage, increasing supply of dissolving oxygen, decreasing sludge reflux ratio to get ideal treating effect.