功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2013年
24期
3558-3560
,共3页
崔天放%于维%张丽%张媛媛%李楠
崔天放%于維%張麗%張媛媛%李楠
최천방%우유%장려%장원원%리남
双马来酰亚胺%叔丁基%溶解性%粘度
雙馬來酰亞胺%叔丁基%溶解性%粘度
쌍마래선아알%숙정기%용해성%점도
bismaleimide%tert-butyl%solubility%viscosity
为了提高双马来酰亚胺树脂单体的溶解性和降低预聚体粘度,实现低成本的 RTM成型工艺加工,设计并合成了叔丁基改性双马树脂3,3′-二叔丁基-4,4′-二苯甲烷双马来酰亚胺(BBDM)树脂。采用红外光谱仪和元素分析仪,进行了结构表征。溶解性实验表明,该新型树脂单体在普通溶剂中的溶解性得到明显改善。预聚体粘度测定和熔点测定表明,预聚体粘度达到了树脂传递模塑工艺(RTM)对树脂体系粘度的要求(0.20~0.28 Pa·s),原有树脂的耐热性也得到了保留。
為瞭提高雙馬來酰亞胺樹脂單體的溶解性和降低預聚體粘度,實現低成本的 RTM成型工藝加工,設計併閤成瞭叔丁基改性雙馬樹脂3,3′-二叔丁基-4,4′-二苯甲烷雙馬來酰亞胺(BBDM)樹脂。採用紅外光譜儀和元素分析儀,進行瞭結構錶徵。溶解性實驗錶明,該新型樹脂單體在普通溶劑中的溶解性得到明顯改善。預聚體粘度測定和鎔點測定錶明,預聚體粘度達到瞭樹脂傳遞模塑工藝(RTM)對樹脂體繫粘度的要求(0.20~0.28 Pa·s),原有樹脂的耐熱性也得到瞭保留。
위료제고쌍마래선아알수지단체적용해성화강저예취체점도,실현저성본적 RTM성형공예가공,설계병합성료숙정기개성쌍마수지3,3′-이숙정기-4,4′-이분갑완쌍마래선아알(BBDM)수지。채용홍외광보의화원소분석의,진행료결구표정。용해성실험표명,해신형수지단체재보통용제중적용해성득도명현개선。예취체점도측정화용점측정표명,예취체점도체도료수지전체모소공예(RTM)대수지체계점도적요구(0.20~0.28 Pa·s),원유수지적내열성야득도료보류。
In order to improve the monomer solubility of bismaleimide resin,lower the resin prepolymer’s vis-cosity and make the bismaleimide resin easy to manufacture by the RTM molding process which was knowen as a new low cost process,3,3′-ditert-butyl-4,4′-diphenylmethane bismaleimide (BBDM).The chemical struc-tures of the products were confirmed by infrared spectroscopy and elemental analysis.Solubility experiments show that the solubility of the new resin monomer was significantly improved in common solvents.Data of the prepolymer viscosity and melting points show that the viscosity of the prepolymer meets the requirements of the resin transfer molding process (RTM)(0.20-0.28 Pa·s)and the heat resistance of original resin has been also retained.With the development of our society,more and more high performance composite materials used in special areas,such as aerospace,high-temperature protection industry and microelectronic field,are needed.