CAJ | 학술논문

利用双螺杆挤出机制备PC/ABS合金，探讨了基材不同种类的选择及其比例的调整对PC/ABS合金性能的影响。结果表明：在PC/ABS合金（70/30）体系中，选用23.23％SAN粉料和5.89％高胶粉替代ABS粒料制成的合金缺口冲击强度可达95.04kJ/m2，拉伸强度达58.28MPa，弯曲强度达73.8MPa。
이용쌍라간제출궤제비PC/ABS합금，탐토료기재불동충류적선택급기비례적조정대PC/ABS합금성능적영향。결과표명：재PC/ABS합금（70/30）체계중，선용23.23％SAN분료화5.89％고효분체대ABS립료제성적합금결구충격강도가체95.04kJ/m2，랍신강도체58.28MPa，만곡강도체73.8MPa。
The PC/ABS alloy was prepared by tw in-screw extruder.The selection of different resin and different resin inverse proportion were discussed.The results show that notch impact strength is 95.04kJ/m2 , the tensile strength is 58.28MPa,the flexural strength is 73.8MPa by adding 23.23% SAN and 5.89% PB into PC/ABS (70/30).