功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2013年
23期
3397-3400,3404
,共5页
温度%木纤维复合材料%抗压强度%弹性模量
溫度%木纖維複閤材料%抗壓彊度%彈性模量
온도%목섬유복합재료%항압강도%탄성모량
temperature%wood composite%compression strength%modulus of elasticity
通过对 LVL 木纤维复合材料进行温度为20~225℃下的静态抗压测试,研究了其抗压力学性能随温度的变化.结果表明,随着温度的增加,LVL木纤维复合材料的抗压强度、抗压弹性模量均有显著下降.当温度升至225℃时,LVL木纤维复合材料的抗压强度、抗压弹性模量分别为室温20℃的22.3%、22.2%.根据回归分析,提出了 LVL 木纤维复合材料顺纹抗压强度与温度的关系模型,该模型计算的剩余顺纹抗压强度与实验结果吻合较好.
通過對 LVL 木纖維複閤材料進行溫度為20~225℃下的靜態抗壓測試,研究瞭其抗壓力學性能隨溫度的變化.結果錶明,隨著溫度的增加,LVL木纖維複閤材料的抗壓彊度、抗壓彈性模量均有顯著下降.噹溫度升至225℃時,LVL木纖維複閤材料的抗壓彊度、抗壓彈性模量分彆為室溫20℃的22.3%、22.2%.根據迴歸分析,提齣瞭 LVL 木纖維複閤材料順紋抗壓彊度與溫度的關繫模型,該模型計算的剩餘順紋抗壓彊度與實驗結果吻閤較好.
통과대 LVL 목섬유복합재료진행온도위20~225℃하적정태항압측시,연구료기항압역학성능수온도적변화.결과표명,수착온도적증가,LVL목섬유복합재료적항압강도、항압탄성모량균유현저하강.당온도승지225℃시,LVL목섬유복합재료적항압강도、항압탄성모량분별위실온20℃적22.3%、22.2%.근거회귀분석,제출료 LVL 목섬유복합재료순문항압강도여온도적관계모형,해모형계산적잉여순문항압강도여실험결과문합교호.
The influence of temperature,in a range from 20 to 225 ℃,on the compression properties of LVL wood composite specimens was determined by static compression test.The result indicated that the compression strength and modulus of elasticity of LVL wood composite specimens decreased significantly with increasing temperature.Compression strength and modulus of elasticity at 225 ℃ compared to room temperature 20 ℃ was respectively 22.3% and 22.2%.A statistical regression-based model was developed and evaluated for predicted the strength loss of LVL composite wood as a function of thermal exposure temperature.The predicted theoreti-cal results consistently matched the observed values.