云南化工
雲南化工
운남화공
YUNNAN CHEMICAL TECHNOLOGY
2012年
2期
45-49
,共5页
张远欣%娄雅琪%魏爱萍%吕维华%杨辉
張遠訢%婁雅琪%魏愛萍%呂維華%楊輝
장원흔%루아기%위애평%려유화%양휘
北疆%原油%乌兰管道站%源油评价
北疆%原油%烏蘭管道站%源油評價
북강%원유%오란관도참%원유평개
North Xinjiang%crude oil%Urumchi-Lanzhou Pipeline%oil evaluation
对乌兰管道首站北疆原油进行了综合评价。结果表明,该原油密度大(867.3 kg/m3),硫含量低(0.1%),蜡含量高(11.46%),属于中质低硫高蜡原油。重整原料和汽油馏分烷烃含量较高,适宜做乙烯裂解料。煤油馏分硫含量高,柴油馏分氮含量高,均需加强精制效果。减压蜡油酸值高、黏度指数低,不适合生产高黏度指数润滑油,Cp较高(56.34%),CA低(7.69%),残炭值低(0.013%),重金属含量较小,是催化裂解的优良原料。渣油较轻,属于第二类渣油,硫含量较小(0.26%),沥青质含量较低(1.5%),是理想的催化裂化原料的掺料或焦化原料。
對烏蘭管道首站北疆原油進行瞭綜閤評價。結果錶明,該原油密度大(867.3 kg/m3),硫含量低(0.1%),蠟含量高(11.46%),屬于中質低硫高蠟原油。重整原料和汽油餾分烷烴含量較高,適宜做乙烯裂解料。煤油餾分硫含量高,柴油餾分氮含量高,均需加彊精製效果。減壓蠟油痠值高、黏度指數低,不適閤生產高黏度指數潤滑油,Cp較高(56.34%),CA低(7.69%),殘炭值低(0.013%),重金屬含量較小,是催化裂解的優良原料。渣油較輕,屬于第二類渣油,硫含量較小(0.26%),瀝青質含量較低(1.5%),是理想的催化裂化原料的摻料或焦化原料。
대오란관도수참북강원유진행료종합평개。결과표명,해원유밀도대(867.3 kg/m3),류함량저(0.1%),사함량고(11.46%),속우중질저류고사원유。중정원료화기유류분완경함량교고,괄의주을희렬해료。매유류분류함량고,시유류분담함량고,균수가강정제효과。감압사유산치고、점도지수저,불괄합생산고점도지수윤활유,Cp교고(56.34%),CA저(7.69%),잔탄치저(0.013%),중금속함량교소,시최화렬해적우량원료。사유교경,속우제이류사유,류함량교소(0.26%),력청질함량교저(1.5%),시이상적최화열화원료적참료혹초화원료。
Overall evaluation of crude oil in North Xinjiang on Urumchi-Lanzhou Pipeline shows that the crude oil is of high density(867.3 kg/m3) with low sulfur and high wax,which is 0.1% and 11.46% respectively,so it is a middle quality crude oil.The reforming materials and gasoline distillation fractions are good cracking materials owing to their high alkane content,while kerosene and diesel distillation fractions need to be intensified refined because of their high sulfur and nitrogen contents,The decompressed wax oil is unsuitable for manufacture high viscosity index lubricant because the oleic acid content is high while the viscosity index is low.However,with high Cp(56.34%),low CA(7.69%),low carbon residue(0.013%) and less heavy metals,it is fine material for catalytic cracking.Residual oil is an ideal catalytic cracking and coking material,owing to small proportion of sulfur(0.26%) and asphalt(1.5%) belong to the second category in residual oil.