湖北民族学院学报(自然科学版)
湖北民族學院學報(自然科學版)
호북민족학원학보(자연과학판)
JOURNAL OF HUBEI INSTITUTE FOR NATIONALITIES(NATURAL SCIENCE EDITION)
2013年
3期
308-312
,共5页
易金桥%谭建军%廖红华%黄勇
易金橋%譚建軍%廖紅華%黃勇
역금교%담건군%료홍화%황용
射频识别%MSP430%电磁耦合%低功耗%负载调制
射頻識彆%MSP430%電磁耦閤%低功耗%負載調製
사빈식별%MSP430%전자우합%저공모%부재조제
为了降低非接触式射频识别系统的功耗,增大感应距离,设计了一种基于MSP430单片机的低功耗射频识别系统,包含阅读器和应答器两部分.阅读器采用4MHz有源晶振产生载波信号,经过ASK调制、功率放大后,由LC串联谐振回路发射输出;应答器通过LC并联谐振电路耦合获取高频电能后,经过整流、滤波、稳压为应答器供电,启动单片机,解调来自检波电路的调制信号.当应答器预置开关状态改变时,采用MSP430单片机编码,经过负载调制后输出;阅读器感应到应答器的负载变化时,经过放大、检波和整形电路处理后,由阅读器单片机解码显示,完成系统的半双工通信.实验结果表明,系统具有电路结构简单、功耗低、感应距离远、误码率低、响应迅速等优点.
為瞭降低非接觸式射頻識彆繫統的功耗,增大感應距離,設計瞭一種基于MSP430單片機的低功耗射頻識彆繫統,包含閱讀器和應答器兩部分.閱讀器採用4MHz有源晶振產生載波信號,經過ASK調製、功率放大後,由LC串聯諧振迴路髮射輸齣;應答器通過LC併聯諧振電路耦閤穫取高頻電能後,經過整流、濾波、穩壓為應答器供電,啟動單片機,解調來自檢波電路的調製信號.噹應答器預置開關狀態改變時,採用MSP430單片機編碼,經過負載調製後輸齣;閱讀器感應到應答器的負載變化時,經過放大、檢波和整形電路處理後,由閱讀器單片機解碼顯示,完成繫統的半雙工通信.實驗結果錶明,繫統具有電路結構簡單、功耗低、感應距離遠、誤碼率低、響應迅速等優點.
위료강저비접촉식사빈식별계통적공모,증대감응거리,설계료일충기우MSP430단편궤적저공모사빈식별계통,포함열독기화응답기량부분.열독기채용4MHz유원정진산생재파신호,경과ASK조제、공솔방대후,유LC천련해진회로발사수출;응답기통과LC병련해진전로우합획취고빈전능후,경과정류、려파、은압위응답기공전,계동단편궤,해조래자검파전로적조제신호.당응답기예치개관상태개변시,채용MSP430단편궤편마,경과부재조제후수출;열독기감응도응답기적부재변화시,경과방대、검파화정형전로처리후,유열독기단편궤해마현시,완성계통적반쌍공통신.실험결과표명,계통구유전로결구간단、공모저、감응거리원、오마솔저、향응신속등우점.