红外与激光工程
紅外與激光工程
홍외여격광공정
INFRARED AND LASER ENGINEERING
2013年
11期
3047-3052
,共6页
王迎威%王飞%符力平%方靖岳%王广%常胜利%张学骜
王迎威%王飛%符力平%方靖嶽%王廣%常勝利%張學驁
왕영위%왕비%부력평%방정악%왕엄%상성리%장학오
金纳米颗粒阵列%自组装%阳极氧化铝%表面等离子体
金納米顆粒陣列%自組裝%暘極氧化鋁%錶麵等離子體
금납미과립진렬%자조장%양겁양화려%표면등리자체
gold nanoparticles arrays%self-assembled%anodic alumina oxide(AAO)%surface plasmon resonance(SPR)
采用真空蒸镀的方法在多孔氧化铝模板表面得到薄金膜,随后在真空管式炉中进行热处理,热处理中发生的热去湿过程使得金膜在多孔氧化铝表面形成有序的金纳米颗粒阵列。同时还研究了多孔氧化铝模板制备过程中二次氧化的作用,发现一次氧化对二次氧化进行具有一定指导作用;另外,研究了扩孔时间对模板孔径的影响,一定条件下,扩孔时间与孔径成正比例关系;最后研究了镀膜厚度对金纳米颗粒的影响,结果中可以看到,金膜的厚度直接影响金纳米颗粒阵列的形成。最后在分光光度计上的光学测量吸收光谱的结果中,出现了表面等离子体作用引起的很强的吸收峰。
採用真空蒸鍍的方法在多孔氧化鋁模闆錶麵得到薄金膜,隨後在真空管式爐中進行熱處理,熱處理中髮生的熱去濕過程使得金膜在多孔氧化鋁錶麵形成有序的金納米顆粒陣列。同時還研究瞭多孔氧化鋁模闆製備過程中二次氧化的作用,髮現一次氧化對二次氧化進行具有一定指導作用;另外,研究瞭擴孔時間對模闆孔徑的影響,一定條件下,擴孔時間與孔徑成正比例關繫;最後研究瞭鍍膜厚度對金納米顆粒的影響,結果中可以看到,金膜的厚度直接影響金納米顆粒陣列的形成。最後在分光光度計上的光學測量吸收光譜的結果中,齣現瞭錶麵等離子體作用引起的很彊的吸收峰。
채용진공증도적방법재다공양화려모판표면득도박금막,수후재진공관식로중진행열처리,열처리중발생적열거습과정사득금막재다공양화려표면형성유서적금납미과립진렬。동시환연구료다공양화려모판제비과정중이차양화적작용,발현일차양화대이차양화진행구유일정지도작용;령외,연구료확공시간대모판공경적영향,일정조건하,확공시간여공경성정비례관계;최후연구료도막후도대금납미과립적영향,결과중가이간도,금막적후도직접영향금납미과립진렬적형성。최후재분광광도계상적광학측량흡수광보적결과중,출현료표면등리자체작용인기적흔강적흡수봉。
Using vacuum deposition and subsequent thermal dewetting, Au nanoparticles ordered array were fabricated on the conventional ordered porous alumina template. Here, a self-assembled two-dimensional Au nanoparticles arrays was demonstrated, which consisted of several gold nanoparticles around every hole on the surface of porous alumina template. Furthermore, second anodized and widen diameter time influence on templates formed were investigated. During the fabrication of template, first anodization played guiding role for second anodization, and the diameter of hole direct was proportion with the widen diameter time. It also found that the form of Au nanoparticles arrays depend on the thickness of Au film. At last, optical properties for the material was test. Strong absorption peaks of the UV-visible absorption spectrum due to the surface plasmon resonance of Au nanoparticles were observed.