装备环境工程
裝備環境工程
장비배경공정
EQUIPMENT ENVIRONMENTAL ENGINEERING
2013年
6期
25-28,87
,共5页
沉积水%腐蚀%焊接接头%B610E储罐钢
沉積水%腐蝕%銲接接頭%B610E儲罐鋼
침적수%부식%한접접두%B610E저관강
deposited water%corrosion%welding joint%B610E tank steel
通过室内浸泡、应力腐蚀试验对B610E高强储罐钢所用不同焊接方式在石油沉积水中的耐蚀性进行研究。结果表明,B610E气体保护焊材料的耐蚀性最好,将Q235+B610E埋弧平焊对接后,由于存在电偶对,耐蚀效果最差。在石油沉积水中,B610E埋横焊具有中等SCC抗力,B610E气体保护焊、B610E气电立焊以及B610E+Q235埋弧平焊对接具有高的SCC抗力。
通過室內浸泡、應力腐蝕試驗對B610E高彊儲罐鋼所用不同銲接方式在石油沉積水中的耐蝕性進行研究。結果錶明,B610E氣體保護銲材料的耐蝕性最好,將Q235+B610E埋弧平銲對接後,由于存在電偶對,耐蝕效果最差。在石油沉積水中,B610E埋橫銲具有中等SCC抗力,B610E氣體保護銲、B610E氣電立銲以及B610E+Q235埋弧平銲對接具有高的SCC抗力。
통과실내침포、응력부식시험대B610E고강저관강소용불동한접방식재석유침적수중적내식성진행연구。결과표명,B610E기체보호한재료적내식성최호,장Q235+B610E매호평한대접후,유우존재전우대,내식효과최차。재석유침적수중,B610E매횡한구유중등SCC항력,B610E기체보호한、B610E기전립한이급B610E+Q235매호평한대접구유고적SCC항력。
The corrosion-resistant performance of different welded joints of B610E high-strength tank steel in the deposited water of petroleum was investigated by indoor soaking test, and stress corrosion test. Results showed that B610E gas shielded welding materials has the best corrosion-resistance;submerged arc welding of Q235+B610E pairing is the worst due to galvanic corrosion effect;in the deposited water of petroleum, B610E submerged horizontal welding with medium resistance to SCC;B610E gas shielded welding, B610E electro-gas welding and B610E+Q235 submerged flat welding has high SCC resistance.