长江大学学报(自然版)理工上旬刊
長江大學學報(自然版)理工上旬刊
장강대학학보(자연판)리공상순간
Journal of Yangtze University(Natural Science Edition)
2014年
1期
9-12
,共4页
硬度%键合性质%电子结构%力学性质
硬度%鍵閤性質%電子結構%力學性質
경도%건합성질%전자결구%역학성질
hardness%bonding properties%electronic structure%mechanical properties
以往的研究表明材料硬度与键合性质之间有密切的联系,但材料硬度和晶体体弹模量(B)、剪切模量(G)之间的联系不存在一一对应关系.基于密度泛函理论,在广义梯度近似的计算条件下得到了多种典型晶体材料的结构参数和弹性模量参数,将参数代入Simunek A.理论小组的理论硬度计算模型可获得晶体的理论硬度值.通过分析晶体的硬度值与体弹模量(B)、剪切模量(G)之间的关系,认为“难压缩”并不等同于“高硬度”;通过对晶体键密度和键布居等成键电子结构信息的分析,改进了Simunek理论小组硬度计算模型中一个参数的获取方法,使计算结果更具合理性;通过定性分析认为拥有强的共价键和三维立体空间结构是晶体具有高硬度的典型特征,为今后新型超硬材料的理论研究和实验合成提供重要参考.
以往的研究錶明材料硬度與鍵閤性質之間有密切的聯繫,但材料硬度和晶體體彈模量(B)、剪切模量(G)之間的聯繫不存在一一對應關繫.基于密度汎函理論,在廣義梯度近似的計算條件下得到瞭多種典型晶體材料的結構參數和彈性模量參數,將參數代入Simunek A.理論小組的理論硬度計算模型可穫得晶體的理論硬度值.通過分析晶體的硬度值與體彈模量(B)、剪切模量(G)之間的關繫,認為“難壓縮”併不等同于“高硬度”;通過對晶體鍵密度和鍵佈居等成鍵電子結構信息的分析,改進瞭Simunek理論小組硬度計算模型中一箇參數的穫取方法,使計算結果更具閤理性;通過定性分析認為擁有彊的共價鍵和三維立體空間結構是晶體具有高硬度的典型特徵,為今後新型超硬材料的理論研究和實驗閤成提供重要參攷.
이왕적연구표명재료경도여건합성질지간유밀절적련계,단재료경도화정체체탄모량(B)、전절모량(G)지간적련계불존재일일대응관계.기우밀도범함이론,재엄의제도근사적계산조건하득도료다충전형정체재료적결구삼수화탄성모량삼수,장삼수대입Simunek A.이론소조적이론경도계산모형가획득정체적이론경도치.통과분석정체적경도치여체탄모량(B)、전절모량(G)지간적관계,인위“난압축”병불등동우“고경도”;통과대정체건밀도화건포거등성건전자결구신식적분석,개진료Simunek이론소조경도계산모형중일개삼수적획취방법,사계산결과경구합이성;통과정성분석인위옹유강적공개건화삼유입체공간결구시정체구유고경도적전형특정,위금후신형초경재료적이론연구화실험합성제공중요삼고.