电子科技
電子科技
전자과기
IT AGE
2014年
6期
42-45
,共4页
词模态分析%天线座转台%有限元%固有谐振频率
詞模態分析%天線座轉檯%有限元%固有諧振頻率
사모태분석%천선좌전태%유한원%고유해진빈솔
根据工程实际应用需要,利用UG建模功能建立天线座转台的三维模型,通过NXNastran进行有限元分析,并根据实际用边界条件和设定的频率范围进行频响分析,计算模态和应力分布.有限元分析结果表明,进行结构优化设计,提高了固有频率,使各项机械性能指标满足设计要求.
根據工程實際應用需要,利用UG建模功能建立天線座轉檯的三維模型,通過NXNastran進行有限元分析,併根據實際用邊界條件和設定的頻率範圍進行頻響分析,計算模態和應力分佈.有限元分析結果錶明,進行結構優化設計,提高瞭固有頻率,使各項機械性能指標滿足設計要求.
근거공정실제응용수요,이용UG건모공능건립천선좌전태적삼유모형,통과NXNastran진행유한원분석,병근거실제용변계조건화설정적빈솔범위진행빈향분석,계산모태화응력분포.유한원분석결과표명,진행결구우화설계,제고료고유빈솔,사각항궤계성능지표만족설계요구.