牙体牙髓牙周病学杂志
牙體牙髓牙週病學雜誌
아체아수아주병학잡지
CHINESE JOURNAL OF CONSERVATIVE DENTISTRY
2014年
5期
291-293
,共3页
朱琼%王洋%方溢云%于春梅
硃瓊%王洋%方溢雲%于春梅
주경%왕양%방일운%우춘매
Er:YAG激光%玻璃离子%剪切强度
Er:YAG激光%玻璃離子%剪切彊度
Er:YAG격광%파리리자%전절강도
Er:YAG Laser%glass ionomer%shear bond strength
目的:评价冷热循环对Er:YAG激光以及车针备洞后牙本质与玻璃离子粘结剪切强度的影响。方法:40个离体牙分为颊舌两半,完全去除颊舌侧牙釉质,暴露牙本质后自凝塑料包埋,制成80个试件后随机分为A、B、C、D 4组(n=20)。A组采用Er:YAG激光照射后粘结Fuji IX;B组采用Er:YAG激光照射后粘结Fuji IX,再进行12000次冷热循环;C组采用车针预备牙本质后粘结Fuji IX;D组采用车针预备牙本质后粘结Fuji IX,再进行12000次冷热循环。所有样本置于万能材料力学测试机进行剪切强度测试。结果:A、B、C组之间的剪切强度无显著差异(P>0.05),D组剪切强度明显小于其他3组(P<0.05)。结论:经过冷热循环之后,Er:YAG激光组的剪切强度未见明显变化,但车针备洞组的剪切强度明显降低。
目的:評價冷熱循環對Er:YAG激光以及車針備洞後牙本質與玻璃離子粘結剪切彊度的影響。方法:40箇離體牙分為頰舌兩半,完全去除頰舌側牙釉質,暴露牙本質後自凝塑料包埋,製成80箇試件後隨機分為A、B、C、D 4組(n=20)。A組採用Er:YAG激光照射後粘結Fuji IX;B組採用Er:YAG激光照射後粘結Fuji IX,再進行12000次冷熱循環;C組採用車針預備牙本質後粘結Fuji IX;D組採用車針預備牙本質後粘結Fuji IX,再進行12000次冷熱循環。所有樣本置于萬能材料力學測試機進行剪切彊度測試。結果:A、B、C組之間的剪切彊度無顯著差異(P>0.05),D組剪切彊度明顯小于其他3組(P<0.05)。結論:經過冷熱循環之後,Er:YAG激光組的剪切彊度未見明顯變化,但車針備洞組的剪切彊度明顯降低。
목적:평개랭열순배대Er:YAG격광이급차침비동후아본질여파리리자점결전절강도적영향。방법:40개리체아분위협설량반,완전거제협설측아유질,폭로아본질후자응소료포매,제성80개시건후수궤분위A、B、C、D 4조(n=20)。A조채용Er:YAG격광조사후점결Fuji IX;B조채용Er:YAG격광조사후점결Fuji IX,재진행12000차랭열순배;C조채용차침예비아본질후점결Fuji IX;D조채용차침예비아본질후점결Fuji IX,재진행12000차랭열순배。소유양본치우만능재료역학측시궤진행전절강도측시。결과:A、B、C조지간적전절강도무현저차이(P>0.05),D조전절강도명현소우기타3조(P<0.05)。결론:경과랭열순배지후,Er:YAG격광조적전절강도미견명현변화,단차침비동조적전절강도명현강저。
AIM:To study the influence of thermocycling on the shear bond strength of a glass-ionomer ce-ment to Er:YAG irradiated or bur-prepared dentin.METHODS:40 premolars were selected and the roots were re-moved.Each premolar was separated into two parts.80 samples were individually embedded in polyester resin.Sam-ples were randomly assigned into 4 groups (n=20)according to the method of cavity preparation:Er:YAG laser or bur-preparation,with or without thermocycling for 12000 times.Fuji IX was adhered to the surface of the samples in each group.The shear bond strength of samples was measured by an universal testing machine.RESULTS:The thermocy-cle had no significant effect on the shear bond strength of glass ionomer to laser-irradiated dentin (P>0.05).In bur-prepared samples,the thermocycling decreased shear bond strength value (P<0.05 ).CONCLUSION:Thermocy-cling can decrease the shear bond strength of glass-ionomer cement bonded to bur-prepared dentin.