矿业安全与环保
礦業安全與環保
광업안전여배보
MINING SAFETY & ENVIRONMENTAL PROTECTION
2014年
5期
40-42,55
,共4页
板翅式换热器%封头%导流翼%数值模拟
闆翅式換熱器%封頭%導流翼%數值模擬
판시식환열기%봉두%도류익%수치모의
plate-fin heat exchanger%sealed-head%flow-guiding wing%numerical simulation
对于低浓度煤层气含氧液化装置,板翅式换热器是其冷箱中的关键设备。提出一种新型带有导流翼的板翅式换热器封头结构,采用CFD方法对该新型封头结构进行了数值计算,并对其流动与压力特性进行分析和比较,结果表明:该新型封头结构有效地改善了换热器封头内部物流分配特性,能更均匀地分配物流到各个换热通道。该研究对冷箱中换热器的设计制造具有理论指导意义。
對于低濃度煤層氣含氧液化裝置,闆翅式換熱器是其冷箱中的關鍵設備。提齣一種新型帶有導流翼的闆翅式換熱器封頭結構,採用CFD方法對該新型封頭結構進行瞭數值計算,併對其流動與壓力特性進行分析和比較,結果錶明:該新型封頭結構有效地改善瞭換熱器封頭內部物流分配特性,能更均勻地分配物流到各箇換熱通道。該研究對冷箱中換熱器的設計製造具有理論指導意義。
대우저농도매층기함양액화장치,판시식환열기시기랭상중적관건설비。제출일충신형대유도류익적판시식환열기봉두결구,채용CFD방법대해신형봉두결구진행료수치계산,병대기류동여압력특성진행분석화비교,결과표명:해신형봉두결구유효지개선료환열기봉두내부물류분배특성,능경균균지분배물류도각개환열통도。해연구대랭상중환열기적설계제조구유이론지도의의。
Plate-fin heat exchanger is the key equipment of cold box in the liquefaction plant of the low-concentration oxygen-contained coal-bed methane. In this paper, a new sealed-head structure of plate-fin heat exchanger with wing plate was put forward, numerical simulation was made on this new closed-head structure with CFD method, and analysis and comparison were carried out on its flow and pressure characteristics. The results showed that the new closed-head structure could effectively improve the distribution characteristics of fluid flow in the plate-fin heat exchanger and make the fluid flow to be uniformly distributed into every heat exchange channel. This research has a certain theoretical guiding significance for the design and manufacturing of the heat exchanger in the cold box.