北京工业大学学报
北京工業大學學報
북경공업대학학보
JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY
2014年
9期
1432-1435
,共4页
宋晓艳%贺将韬%周媛媛%刘泉宏
宋曉豔%賀將韜%週媛媛%劉泉宏
송효염%하장도%주원원%류천굉
纳米晶%Li7Si3%结构精修%杨氏模量
納米晶%Li7Si3%結構精脩%楊氏模量
납미정%Li7Si3%결구정수%양씨모량
nanocrystalline%Li7Si3%structure refinement%Young's modulus
为研究纳米结构锂电池阳极材料的特性,试制了纳米晶Li-Si合金.采用优化的纳米晶合金块体材料制备工艺,即熔炼制备粗晶Li7Si3合金铸锭、高能球磨得到Li7Si3非晶粉末,结合放电等离子烧结(spark plasma sintering,SPS)制备得到了纳米晶Li7Si3合金,并对其进行了Rietveld结构精修和杨氏模量测定.结果表明:纳米晶Li7Si3单胞结构参数为a=b=0.4452nm(比粗晶增加0.38%),c=1.823 9 nm(比粗晶增加0.58%),单胞体积Vo=0.313 070nm3(比粗晶增加1.35%).利用纳米压痕法测定纳米晶Li7Si3合金的杨氏模量为(30.6±2.4) GPa.
為研究納米結構鋰電池暘極材料的特性,試製瞭納米晶Li-Si閤金.採用優化的納米晶閤金塊體材料製備工藝,即鎔煉製備粗晶Li7Si3閤金鑄錠、高能毬磨得到Li7Si3非晶粉末,結閤放電等離子燒結(spark plasma sintering,SPS)製備得到瞭納米晶Li7Si3閤金,併對其進行瞭Rietveld結構精脩和楊氏模量測定.結果錶明:納米晶Li7Si3單胞結構參數為a=b=0.4452nm(比粗晶增加0.38%),c=1.823 9 nm(比粗晶增加0.58%),單胞體積Vo=0.313 070nm3(比粗晶增加1.35%).利用納米壓痕法測定納米晶Li7Si3閤金的楊氏模量為(30.6±2.4) GPa.
위연구납미결구리전지양겁재료적특성,시제료납미정Li-Si합금.채용우화적납미정합금괴체재료제비공예,즉용련제비조정Li7Si3합금주정、고능구마득도Li7Si3비정분말,결합방전등리자소결(spark plasma sintering,SPS)제비득도료납미정Li7Si3합금,병대기진행료Rietveld결구정수화양씨모량측정.결과표명:납미정Li7Si3단포결구삼수위a=b=0.4452nm(비조정증가0.38%),c=1.823 9 nm(비조정증가0.58%),단포체적Vo=0.313 070nm3(비조정증가1.35%).이용납미압흔법측정납미정Li7Si3합금적양씨모량위(30.6±2.4) GPa.