强激光与粒子束
彊激光與粒子束
강격광여입자속
HIGH POWER LASER AND PARTICLEBEAMS
2014年
4期
124-128
,共5页
王文娟%李化%李智威%童勇%林福昌
王文娟%李化%李智威%童勇%林福昌
왕문연%리화%리지위%동용%림복창
金属化膜电容器%层间压强%电容器寿命%热处理%外包膜
金屬化膜電容器%層間壓彊%電容器壽命%熱處理%外包膜
금속화막전용기%층간압강%전용기수명%열처리%외포막
metallized film capacitor%inner pressure%capacitor lifetime%heat treatment%wrapped film
通过对圆柱体电容器内部压强进行计算分析,研究提升电容器寿命的方法.首先分析得出,电容器内部层间压强的提高可以减小自愈能量,降低脉冲放电过程中的电容量损失,因此可以提升电容器寿命.其次,提出了电容器内部层间压强的计算模型.试验结果表明:通过合理的热处理工艺,电容器寿命可提高30%;当外包膜层数从20层增加到100层时,电容器寿命提高38%.
通過對圓柱體電容器內部壓彊進行計算分析,研究提升電容器壽命的方法.首先分析得齣,電容器內部層間壓彊的提高可以減小自愈能量,降低脈遲放電過程中的電容量損失,因此可以提升電容器壽命.其次,提齣瞭電容器內部層間壓彊的計算模型.試驗結果錶明:通過閤理的熱處理工藝,電容器壽命可提高30%;噹外包膜層數從20層增加到100層時,電容器壽命提高38%.
통과대원주체전용기내부압강진행계산분석,연구제승전용기수명적방법.수선분석득출,전용기내부층간압강적제고가이감소자유능량,강저맥충방전과정중적전용량손실,인차가이제승전용기수명.기차,제출료전용기내부층간압강적계산모형.시험결과표명:통과합리적열처리공예,전용기수명가제고30%;당외포막층수종20층증가도100층시,전용기수명제고38%.