火炮发射与控制学报
火砲髮射與控製學報
화포발사여공제학보
GUNLAUNCH & CONTROL JOURNAL
2014年
3期
74-77,82
,共5页
霍李%王媛%赖富文%宁平%毕超
霍李%王媛%賴富文%寧平%畢超
곽리%왕원%뢰부문%저평%필초
工程测量技术%火炮回转半径%测边网%条件平差%拟合圆
工程測量技術%火砲迴轉半徑%測邊網%條件平差%擬閤圓
공정측량기술%화포회전반경%측변망%조건평차%의합원
engineering survey technology%gun rotation radius%trilateration network%condi-tion adj ustment%fitting circle
针对火炮在靶场定型试验中需要检测回转半径尺寸的要求,提出了一种便于现场操作的基于测边网的火炮回转半径检测方法。在火炮检测现场布设测边网,采用条件平差的计算方法,建立条件方程式和法方程式,计算各边角的平差值,通过圆拟合得到火炮回转半径的尺寸。试验结果验证了该方法的可行性和有效性。
針對火砲在靶場定型試驗中需要檢測迴轉半徑呎吋的要求,提齣瞭一種便于現場操作的基于測邊網的火砲迴轉半徑檢測方法。在火砲檢測現場佈設測邊網,採用條件平差的計算方法,建立條件方程式和法方程式,計算各邊角的平差值,通過圓擬閤得到火砲迴轉半徑的呎吋。試驗結果驗證瞭該方法的可行性和有效性。
침대화포재파장정형시험중수요검측회전반경척촌적요구,제출료일충편우현장조작적기우측변망적화포회전반경검측방법。재화포검측현장포설측변망,채용조건평차적계산방법,건립조건방정식화법방정식,계산각변각적평차치,통과원의합득도화포회전반경적척촌。시험결과험증료해방법적가행성화유효성。
Aimed at the requirement to inspect and measure size of the gun rotation radius dur-ing the qualification test in the firing range,a kind of method based on trilateration network was proposed to be easy and feasible for site operation.With the help of this method,firstly, the trilateration control network was established in the testing field;secondly,the condition adj ustment and normal equation were set up by use of the calculation method of condition ad-j ustment,and the adj ustment value of every side corner was acquired;finally,the rotation ra-dius value of the gun was obtained by use of the fitting circle.The test results inspect and veri-fy the feasibility and validity of the method.